Name: Жгут проводов 1-to-3 SM Splitter Harness
Brand: Wire Harness Processing Division
Availability: InStock

Жгут проводов 1-to-3 SM Splitter Harness

Технические характеристики

Описание изделия	4H/2501H-6P带扣+2507H-2P*3+UL1007#24 L=245/270mm
№ детали заказчика	R30073395 (MEG-190222)
№ чертежа	S007240033
Версия	A
Дата	2019-11-23

Размеры

Позиция	Значение
H1 to H2 branch length	270±10 mm
H1 to H3 branch length	245±10 mm
Main trunk length	200±10 mm
PVC sleeve length	100±10 mm

Определение клемм

Разъем	Контакты	Распиновка
H1 (2501H-6P locking plug, Pitch:2.5)	6P	1Black 2Black 3Yellow 4Yellow 5White 6White
H2 (2507H-2P, black, SM-2P)	2P	1Black 2Black
H3 (2507H-2P, yellow, SM-2P)	2P	1Yellow 2Yellow
H4 (2507H-2P, white, SM-2P)	2P	1White 2White

Спецификация материалов

№	Спецификация материала	Кол-во	Ед.
1	2501H-6P locking plug, Pitch:2.5mm	1	PCS
2	2501T	6	PCS
3	UL1007#24AWG, black×2, white×2	283 each	mm
4	UL1007#24AWG, yellow×2	258	mm
5	2507H-2P plug housing, white (SM-2P)	1	PCS
6	2507H-2P plug housing, yellow (SM-2P)	1	PCS
7	2507H-2P plug housing, black (SM-2P)	1	PCS
8	2507T female terminal (SM-Y)	6	PCS
9	2507H-2P housing lock, red (SM-2PST red lock)	3	PCS
10	PVC sleeve ϕ7.0, black, L=200mm, 300V 105℃	1	PCS
11	White nylon cable tie	1	PCS

Требования к процессу

1. Strip H1 end 2.5mm and crimp 2501T; strip H2 end 2.5mm, crimp 2507T and insert into housing as shown; 2. Same-color wires are not polarity-specific; 3. SM-2P plug housings must be Huafu brand.

Условия испытаний

Single-pin terminal-to-wire retention ≥3KG; continuity resistance <2Ω; SM-2P mating force: insertion ≤8N/pin, withdrawal ≥3N/pin.

Упаковка

50 PCS per bundle.

Инженерный чертеж

Engineering Drawing - Жгут проводов 1-to-3 SM Splitter Harness

Введение

Данный Splitter harness uses one latching 2501H-6P housing at the input end and branches into three 2507H-2P SM housings at the output end. The six UL1007 проводники in black, white and yellow are split into three pairs along the branch point, letting one connection feed three device points. It is a fixed internal branch harness for electronic equipment, with the split arrangement and lead lengths set per the approved drawing.

Характеристики продукта

One latching 2501H-6P housing at the input end
Three 2507H-2P SM housings at the output end
Six UL1007 24AWG leads in black, white and yellow pairs
Heat-shrink bundling at the branch point
Fixed branch lengths and pairing per drawing

Технические характеристики

Pin count: 6 input circuits, split into three 2P branches
Wire: UL1007 24AWG hookup wire
Клеммы: 2501T and 2507T обжатые tinned клеммаs
Housing pitch: 2.5mm series
Testing: 100% continuity test on finished harnesses

Гарантия качества

Мы производим жгуты по чертежам и образцам заказчика, поддерживая мелкосерийное прототипирование и серийное производство. Каждый жгут проходит 100% контроль непрерывности цепи и испытание повышенным напряжением перед отгрузкой. Свяжитесь с нами для получения детального коммерческого предложения.

Получить расчет Вернуться к списку