Smart Curtain Motor Wire Harness
Product Introduction
This smart curtain motor harness is built to drawing S007240032 for the internal connections of a curtain drive unit. A 9-pin SCN180H header at 2.5 mm pitch branches out to three 2-pin plug housings in white, yellow and black, each carrying a pair of color-matched UL1007#24 tinned-copper wires. The main run is about 270 mm long, with branch lengths tailored to the motor, limit switch and receiver positions, and the assembly is kept tidy by a black PVC sleeve and a nylon cable tie.
Product Features
- Defined circuit layout: pin-out per drawing, with empty pins as specified
- Color-coded circuits: white, yellow and black pairs carry their own branches
- Secured housings: red 2-pin locks prevent accidental disconnection
- Neat bundling: PVC sleeve and cable tie keep wires orderly inside the rail
- Controlled terminations: SCN-T and 2507T female terminals crimped to stripped ends
Technical Specifications
- Part number: 4H/SCNH-9P+2507H-2Px3+UL1007#24 L=270 mm; customer part R30073006
- Main conductor: UL1007#24 tinned copper, black x2, yellow x2, white x2, about 282 mm each
- Housings: SCN180H-9P at 2.5 mm pitch plus three 2507II-2P plug housings
- Lengths: total at H1 270 plus or minus 10 mm; branches 25, 200 and 100 mm as drawn
- Test: continuity resistance under 2 ohm; insertion up to 8 N per pin, withdrawal at least 3 N per pin; terminal-to-wire retention at least 3 kg
Quality Assurance
The harness is produced to the controlled process: both ends stripped by 2.5 plus or minus 0.5 mm, terminals crimped and inserted into housings as drawn. Finished assemblies are continuity tested and packed 50 pieces per bundle with cable ties. Samples are checked against the drawing before shipment, and lengths and colors can be adjusted on request.