JST Series Connector Agent Docking|PH·XH·SM·ZH·GH·VH Terminals and Housings

JST connector docking column, covering terminals, housings, and pin headers for PH, XH, SM, ZH, SH, GH, EH, XA, PA, PHD, SPH, SCN, SAN, JC25, 5264, DF11, VH, 51005/51006 and other series; series overview, specific part numbers to be checked against drawings/BOM, prices to be inquired according to part number, quantity, and lead time.

Get a Quote

JST Series Matrix

The table below organizes common pin pitches and material compositions by series. Terminals, housings, and receptacles need to be used together within the same series; the series and pin pitches in the table are an overview index.

SeriesNominal PitchTerminalsHousingPin Header/AccessoriesTypical Applications
PH2.00mmOptionalAvailable (including PHB with buckle, PH empty connector)Pin headerInternal low-power signal and power connection of the whole machine
XH2.50mmOptionalAvailable (XHS with lock, XHD single/double row, XHB with latch)Pin housingInternal device wiring harness connection
SM2.50mmOptionalAvailable (SMH250/SMH200)Pin headerLighting and internal device connection
ZH1.50mmOptionalSame seriesPin socketSignal connection in compact spaces
SH1.00mm (SHL1.0)OptionalSame seriesPin headerHigh-density slim connection
GH1.25mm (also available GH1.5)OptionalSame seriesPin headerInternal wiring of small devices
EH2.50mmOptionalSame seriesPin headerStandard internal connection
XA2.50mmOptionalAvailable (including XA open contact)Pin socketInternal power supply and signal of the device
PA2.00mmOptionalSame seriesPin seatUniversal internal connection
PHD2.00mm (PHDC with buckle)OptionalSame seriesSocketDual row connection
SPH2.00mmOptionalSame seriesPin socketSignal circuit
SCN2.00mmOptionalSame seriesPin socketConventional wire end connection
SAN2.00mmOptionalSame seriesPin socketBoard end and wire end mating
JC252.50mm (Same series as JC15/JC20)OptionalSame seriesPin socketInternal docking of equipment
52642.50mmOptionalSame seriesPin socketUniversal connector
DF11 (Hirose)2.00mm (DF13/DF14 same series)OptionalSame seriesSocketBoard mount and wire end connection
VH3.96mm (including VHR, VH air contact)OptionalSame seriesPin headerLarge pitch power connection
51005/510062.00mm (Air Connect)OptionalSame SeriesAccessoryWire-to-Air Connection
High Current Series3.0 / 3.96 / 5.08mmOptionalSame SeriesPin HeaderPower Supply Connections (only series name listed, no current or voltage values)

Relationship Between Terminals and Housings

Terminals of the same series must be used with housings of the same series. Different series cannot be interchanged even if their pin spacing is similar. The latch type (with lock, with clip, open terminal, etc.) must match the mating direction and assembly space. Terminal plating options should be selected based on the type of mating, and the specific plating and wire gauge range should be checked against drawings and samples. This section does not list parameter commitments.

Pin Sockets and SMD Types

Pin sockets are categorized into straight pins, bent pins, horizontally mounted, and vertically mounted types. The tape and reel or bulk packaging form should be confirmed according to the production line assembly method. The wire exit direction, positioning posts, and latch structure of board-end pin sockets should be verified with the housing. For SMD types, the pads and assembly conditions must also be confirmed.

Four Items for Model Verification

Model selection should be verified item by item on four aspects: pin spacing (nominal spacing), number of positions (circuits), plating options, and wire gauge/diameter range. Any item that does not match the drawings should be reconfirmed. Fit relationship, packaging form, and printed markings should be checked together in the prototyping stage to avoid changing part numbers in the mass production stage.

Inquiry and Replacement Part Confirmation

Submit inquiries according to part number, quantity, and lead time. Replacement parts must meet the same pin spacing and latch type. Plating and wire gauge should be verified item by item, and first check fit and assembly with samples before switching. This section only provides brand material interfacing and does not guarantee authorization. For more connectors, you can browse the Agency Section Home, Product Center, and JST Connector Categories, or submit BOM verification requests via Contact Us.

Extended Series and Part Numbers

Component-Level Model Page

GH / ZH / EH Component Pages

XA / PA / PHD Components Page

SHD / SHLD / PUD Series and Component Pages

SHD Specific Part Number Page

SHLD Specific Part Number Page

Independent pages are created for SHLD 1.0mm double-row specific terminals, 20P housings, and 20P top/side entry sockets to facilitate checking the crimping range, latch, and board mounting direction according to the part number.

PUD Specific Part Number Page

According to the PUD 2.0mm dual-row two-terminal wire gauge, 8P housing, and 8P top/side entry through-hole socket, create separate pages. The specific pin-number suffix and color should be verified according to the drawings.

SHLD 30/40/50P Specific Part Number Pages

Create separate pages for SHLD 1.0mm double-row 30/40/50P housings and 30/40/50P top-entry SMT receptacles, listing the outline A/B/C, packaging quantity, applicable terminals, and corresponding receptacles.

PUD 10/12/14P Specific Part Number Pages

Create separate pages for PUD 2.0mm double-row 10/12/14P housings and 10/12/14P top-entry through-hole receptacles, listing the outline A/B, packaging quantity, applicable terminals, and corresponding housings.