JST ZH Series Terminal|SZH-002T-P0.5 Crimp Terminal
Technical Specifications
Part Description SZH-002T-P0.5 / SZH-003T-P0.5
Customer Part No. Per drawing / BOM
Drawing No. Per drawing / BOM
Version Component overview
Date —

Dimensions

ItemValue
Pitch1.5 mm
Wire RangeAWG28–26 / AWG32–28

Product Introduction

The JST ZH series terminals are used for crimping wire ends in the 1.5mm pitch ZH wire-to-board connection system. Common part numbers include SZH-002T-P0.5 and SZH-003T-P0.5. After crimping, the terminals are inserted into ZHR housings and then mated with B2B-ZR series board-side pin headers, suitable for low-profile, compact board connections.

Structure and Compatibility

The terminals consist of a crimping section, contact spring, and anti-deformation structure. The ZH housing has a housing latch to hold the terminal inside the housing; terminals, housings, and pin headers must be from the same series and cannot be mixed across series based solely on the 1.5mm pitch.

Selection Parameters

The following table lists typical structural items and rated values from the JST public catalog. Specific pin count, plating, packaging, and compatible wire gauge should refer to the part number datasheet.

ItemParameter/Typical Value
Nominal Pitch1.5 mm
ComponentWire-End Crimp Terminal
Compatible HousingZHR-2 ... ZHR-13
Compatible Pin HeaderB2B-ZR / B2B-ZR-SM4-TF
Applicable Wire GaugeSZH-002T-P0.5: AWG28–26
Applicable Wire GaugeSZH-003T-P0.5: AWG32–28
Rated Current/Voltage1.0 A / 50 V (Public Catalog Typical Value)
Plating/PackagingTin-plated, Reel, Confirm According to Part Number

Common Part Number Examples

The following part numbers are for search and quotation communication purposes and do not represent the full supply range; actual verification should be based on drawings, BOM, or samples.

Part Number ExampleDescriptionCompatible / Pin Arrangement
SZH-002T-P0.5ZH crimp terminal, AWG28–26, tin-platedZHR housing / ZR pin socket
SZH-003T-P0.5ZH crimp terminal, AWG32–28, tin-platedZHR housing / ZR pin socket
Terminals by part numberOther platings or packaging as per drawing/BOMSame series housing

Application Scenarios

ZH terminals are used for 1.5mm wire-to-board connections inside small electronic devices, display modules, and consumer electronics.

  • Internal wiring of small electronic devices
  • Interconnection between display modules and motherboards
  • Low-profile board-end connections

Quotations and Substitutions

For quotations, please provide terminal part number, wire gauge, insulation outer diameter, plating, packaging, and quantity; for substitutions, first check the crimp range and the fit between the housing latch and pin socket.

Related links: JST ZH series page; JST connector series categories; Agency part number index; Terminal/Housing selection guide.

Get a Quote Back to List