Zhejiang Shenghui Technology Agency Connection | SH Terminals · Housings · Pin Sockets
Zhejiang Shenghui Technology's agency connection column organizes three major categories: SH crimp terminals, housings (including snap-on/with latch), and pin headers (straight pins/angled pins/SMD), covering home appliance applications such as displays, air conditioners, refrigerators, washing machines, security, and environmental appliances; example series are publicly available, complete models are subject to Shenghui's latest selection table, and prices are quoted based on part number, quantity, and delivery time.
Get a QuoteThree Main Types of SH Materials
Shenghui materials are divided into three main types: SH terminals are crimped contacts, selected according to wire gauge and corresponding housings; housings include types with locks and clips, providing alignment, insulation, and anti-loosening functions; pin headers come in straight pins, bent pins, and surface-mount types, used for board connections. These three types of materials need to be matched within the same series. The pitch, number of positions, and lock type must be consistent before matching specific part numbers. Terminals form contacts at the wire end through crimping, housings constrain multiple terminals in the same cavity and prevent loosening, and pin headers fix the entire connection to the circuit board. The cavities, positioning, and lock structures of all three must correspond to each other and cannot be mixed across different series.
Home Appliance Applications and Common Series Examples
The table below organizes application directions for home appliances and common series examples. The listed series are publicly available series examples.
| Application | Typical Use | Common Series Examples |
|---|---|---|
| Display | TV/monitor backlight and motherboard connection | SH80004 / 610599 series |
| Air Conditioning | Indoor and outdoor unit control board connection | SH63007 / MG610041 series |
| Refrigerator | Control board and sensor connection | SH42003 / 5557 / 5559 series |
| Washing Machine | Motor and door lock connection | SH25011 / SMH250 / SMP250L series |
| Security | Camera/access control connection | Same series examples as air conditioning |
| Environmental Appliances | Purifier/fan connection | Same series examples as refrigerator |
- Publish a series of examples; the complete models are subject to the latest selection table from Shenghui.
- SH80004 / 610599 Series
- SH63007 / MG610041 Series
- SH63 Series (3P/4P Positions)
- SH42003 / 5557 / 5559 Series
- SH25011 / SMH250 / SMP250L Series
- SH Crimp Terminals
- SH Housings (with/without Latch)
- SH Pin Headers (Straight/Bent/SMT)
- Home Appliance Application Series
- Display Application Series
- Security Application Series
Selection and Prototyping
Four key elements for model selection verification: pin pitch, number of positions, latch type, and plating options; the prototyping process includes confirming the drawings or BOM, checking the fit relationships, providing samples to verify assembly and insertion/removal, and confirming packaging and labeling before moving to mass production. Pin pitch and number of positions determine cavity arrangement, latch type determines the anti-detachment method after mating, and plating options affect the surface condition of the contacts; during the prototyping stage, retain samples and verification records, recording fit tightness, insertion/removal feel, and wire exit direction item by item to facilitate consistency comparison during mass production.
Batch Traceability
Incoming materials are checked by batch for pin pitch, number of positions, latch appearance, plating, and packaging labels; packaging labels are archived by batch, and samples are retained for subsequent batch comparison. If the same part number arrives in multiple batches, verification results are recorded by batch, and in case of anomalies, traceability can be performed by part number and batch. Simultaneously check whether the cavity in the housing is smooth, whether the latch snaps and rebounds normally, and whether the terminal surface has obvious appearance defects; the part number, number of positions, and quantity on the packaging must match the incoming material records. If unclear printing or cavity/latch anomalies are found, isolate the batch first and record the part number and batch of arrival, then arrange subsequent assembly after recheck conclusions are confirmed.
Inquiry and Alternative Parts
Inquiries should be submitted by part number; alternative parts must have the same pin pitch and latch type, with plating and wire gauge confirmed item by item before switching; this column does not guarantee lead times or production capacity, and authorization and cooperation relationships are based on the contract. When submitting requirements, it is recommended to attach drawings or BOMs, specifying the purpose, mating direction, and packaging requirements, to facilitate verification of fit relationships by part number and arrange samples; after sample verification is passed, proceed to mass mating. For more connectors, you can browse Agency Column Home, Product Center, and Shenghui Connector Categories, or submit your requirements via Contact Us.
SH10000 / SH12501 / SH25001 Series Page
Supplementing the three wire-to-board series in Shenghui's official catalog, covering 1.0mm, 1.25mm, and 2.50mm pitches. Please verify the specific pin positions and part number suffixes according to the catalog and drawings.