Shenghui SH25011 series 2–15P pin-to-pin connectors
Technical Specifications
Part Description Shenghui SH25011 series (per part number)
Customer Part No. Per drawing / BOM
Drawing No. Per part number
Version Series overview
Date —

Dimensions

ItemValue
TypeMulti-circuit wire-to-wire connector
CircuitsPer part number
Mating setTerminal + Housing
MountingPer part number
ApplicationHome appliance and general equipment wiring

product presentation

The disclosed example of a multi-digit line-to-line connection assembly corresponds to the SMH250 and SMP250L type plug-in combination, covering the multi-loop wiring docking inside home appliances and general equipment; terminals and rubber shells are selected according to the same series of material numbers, and the actual number of bits, loop arrangement and wire gauge are checked according to the drawings and BOM. Inside this type of equipment, the series corresponds the connection points of the plate end or wire end to the wire harness branches. During assembly, the material number is confirmed first, and then the crimping and docking directions are checked.

Structure and Supporting Facilities

From the wire end to the plate end, the components are crimp terminals, protective rubber shells and plate end needle seats in sequence. When docking, confirm the matching direction, locking form and wire exit position according to the material number to ensure consistent positioning.

  • Wire-end terminal: crimped onto the end of the conductor wire; after being inserted into the plastic housing, it is positioned in conjunction with the mating connector or the board-end pin socket.
  • Resin housing: encloses and secures the terminals, providing alignment guidance and a fail-safe design.
  • Board end needle holder: fixed to the board end, wire end rubber shell insertion and docking (configured according to series)
  • Component composition: Terminals and rubber shells are optional according to the same series of material numbers

Selection Parameters

When selecting a type, first check the purpose and spatial layout of the circuit, and then compare the component composition, coordination relationship and installation type. The number of bits, wire gauge and output direction are based on the drawings and bill of materials.

ProjectExplanation
Circuit applications and spatial layoutFirst, determine the internal connection points on the equipment and the routing of the wiring harness.
Component compositionCheck the matching relationship between terminals, rubber shell and needle seat according to series
Number of digits and wire gaugeVerify against the part number and the drawing BOM; do not infer values based on general specifications.
Mounting typeThe straight-pin, bent-pin, or surface-mount type of the plate-end pin socket shall be determined according to the part number.
Series positioningFor connecting plates and wires to similar equipment, the same series material number is preferred

application scenarios

This series undertakes board-wire docking and wiring connection in the above scenarios, and the specific access location is determined according to the internal layout of the equipment.

  • Connection of multiple internal wiring harnesses in household appliances
  • Internal wiring connections in general electrical equipment
  • The plug-in connection between the wiring harness branch and the main control circuit

Part Number Composition and Purchase Verification

This page for Shenghui SH25011 series 2–15P pin-to-pin connectors is used for series-level selection. After confirming the series and pitch, you still need to align each item including the specific part number, pin positions, installation type, and matching components before proceeding to request a quote or validate samples; the series page cannot replace the specific part number page.

Verification ItemSpecification on This Page
Series and PitchShenghui SH25011 series 2–15P pin-to-pin connectors, nominal pitch Confirm by part number; the exact part number should follow drawings or BOM
Component CompositionTerminal, housing, pin seat (for board-end applications may require additional parts; may include lock pieces depending on part number); select as a complete set from the same series
Installation TypeThrough-hole or SMD, confirm according to series and part number
Pin Positions and Lead-Out DirectionCheck according to part number, pin numbering, drawings, and BOM; do not infer based on generic pin positions
Crimping and Wire GaugeConfirm according to terminal specification, conductor structure, and measured crimping range
Plating, Color, and PackagingConfirm according to specific part number; series page does not replace part number page, specification, or sample
Substitution BoundaryDifferent series, different pin configurations, through-hole or surface-mount, with or without locks, that have the same spacing or similar appearance should not be interchanged based solely on appearance; terminals, housings, and sockets should be checked and matched as a complete set according to the same series part number.

When requesting a quote, it is recommended to provide: target part number or compatible part number, number of pins, wire gauge and conductor structure, plating and color requirements, packaging method, estimated quantity, and delivery date. If any of these items are missing, first verify according to drawings or samples to avoid directly substituting with a similar series.

Quotation Request and Substitution

Quotations and supplies are based on material numbers, quantities, and delivery dates. Please prepare drawings or BOM for verification before docking. When it comes to alternative materials, it is necessary to confirm that the coordination relationship and circuit arrangement are consistent with the fixed type to avoid mixing similar series.

Related sections and similar materials:Classification of Shenghui SH connectors;Shenghui Brand Materials Column;Shenghui SH Terminal Series;Shenghui SH Gel Shell Series。

Get a Quote Back to List