Shenghui SH42003 series multi-pole wire-to-wire connectors
Technical Specifications
Part Description Shenghui SH42003 series (per part number)
Customer Part No. Per drawing / BOM
Drawing No. Per part number
Version Series overview
Date —

Dimensions

ItemValue
TypeMulti-circuit wire-to-wire connector
CircuitsPer part number
Mating setTerminal + Housing
MountingPer part number
ApplicationMulti-circuit harness docking inside equipment

product presentation

The disclosed example of a multi-pole wire-to-wire connection assembly corresponds to type 5557 and 5559 plug-in combinations, which gather multiple sets of wires into the same docking position and dock them facing the multi-circuit wiring harness inside the equipment; the terminals are crimped according to the circuit and then put into the rubber shell, and the circuit arrangement and output direction are based on the drawings and BOM. Inside this type of equipment, the series corresponds the connection points of the plate end or wire end to the wire harness branches. During assembly, the material number is confirmed first, and then the crimping and docking directions are checked.

Structure and Supporting Facilities

The entire docking system is completed by the combination of terminals, rubber shells (and plate end needle seats): the terminals are located at the ends of the wires, the rubber shells are responsible for positioning and anti-stuck, and the needle seats are fixed to the plate ends. The selection relationship is based on the series selection and drawings.

  • Wire-end terminal: crimped onto the end of the conductor wire; after being inserted into the plastic housing, it is positioned in conjunction with the mating connector or the board-end pin socket.
  • Resin housing: encloses and secures the terminals, providing alignment guidance and a fail-safe design.
  • Board end needle holder: fixed to the board end, wire end rubber shell insertion and docking (configured according to series)
  • Component composition: Terminals and rubber shells are optional according to the same series of material numbers

Selection Parameters

When selecting a type, first check the purpose and spatial layout of the circuit, and then compare the component composition, coordination relationship and installation type. The number of bits, wire gauge and output direction are based on the drawings and bill of materials.

ProjectExplanation
Circuit applications and spatial layoutFirst, determine the internal connection points on the equipment and the routing of the wiring harness.
Component compositionCheck the matching relationship between terminals, rubber shell and needle seat according to series
Number of digits and wire gaugeVerify against the part number and the drawing BOM; do not infer values based on general specifications.
Mounting typeThe straight-pin, bent-pin, or surface-mount type of the plate-end pin socket shall be determined according to the part number.
Series positioningFor connecting plates and wires to similar equipment, the same series material number is preferred

application scenarios

This series undertakes board-wire docking and wiring connection in the above scenarios, and the specific access location is determined according to the internal layout of the equipment.

  • Multiple sets of wiring harnesses within the equipment are connected in a centralized manner.
  • Wiring between the main control board and the functional modules
  • Inter-wire connections in grouped signal and power wiring harnesses

Part Number Composition and Purchase Verification

This page for Shenghui SH42003 series multi-pole wire-to-wire connectors is used for series-level selection. After confirming the series and pitch, you still need to align each item including the specific part number, pin positions, installation type, and matching components before proceeding to request a quote or validate samples; the series page cannot replace the specific part number page.

Verification ItemSpecification on This Page
Series and PitchShenghui SH42003 series multi-pole wire-to-wire connectors, nominal pitch Confirm by part number; the exact part number should follow drawings or BOM
Component CompositionTerminal, housing, pin seat (for board-end applications may require additional parts; may include lock pieces depending on part number); select as a complete set from the same series
Installation TypeThrough-hole or SMD, confirm according to series and part number
Pin Positions and Lead-Out DirectionCheck according to part number, pin numbering, drawings, and BOM; do not infer based on generic pin positions
Crimping and Wire GaugeConfirm according to terminal specification, conductor structure, and measured crimping range
Plating, Color, and PackagingConfirm according to specific part number; series page does not replace part number page, specification, or sample
Substitution BoundaryDifferent series, different pin configurations, through-hole or surface-mount, with or without locks, that have the same spacing or similar appearance should not be interchanged based solely on appearance; terminals, housings, and sockets should be checked and matched as a complete set according to the same series part number.

When requesting a quote, it is recommended to provide: target part number or compatible part number, number of pins, wire gauge and conductor structure, plating and color requirements, packaging method, estimated quantity, and delivery date. If any of these items are missing, first verify according to drawings or samples to avoid directly substituting with a similar series.

Quotation Request and Substitution

During the selection and confirmation phase, drawings or bills of materials can be submitted for verification; the specific price is matched with the material number, purchase quantity and delivery date. If an alternative model is required, the component composition, output direction, and plate end installation method should be reviewed before adoption.

Related sections and similar materials:Classification of Shenghui SH connectors;Shenghui Brand Materials Column;Shenghui SH25011 series 2–15P pin-to-pin connectors;Shenghui SH Terminal Series。

Get a Quote Back to List