JST 51005/51006 series 2.0 mm connector
Product description
The JST 51005/51006 series is a 2.00mm pitch connector, used for connecting small board ends with wire ends, and for docking the pin sockets on the board with the wire harness terminals in the internal wiring of equipment. The component is composed of terminals, rubber shells and pin sockets. The actual part number, bit number and installation type should be confirmed after checking against the drawings and BOM. In the wiring structure where the end of the small board is connected to the end of the wire, this series is used to match the connection point of the board end with the branch of the wire harness. During assembly, first confirm the material number, and then check the crimping and mating directions.
Structure and form a complete set
The connector is composed of crimping terminal, rubber shell and pin seat. Each component is selected according to the same series of material number. Before Assembly, it is necessary to check the positioning direction of wire crimping and rubber shell.
- Wire Terminal: crimped on the end of the wire, into the plastic shell after the plate with the end of the needle base positioning
- Rubber Shell: wraps and secures the terminals, providing docking guidance and foolproof construction
- Needle Base: installed at the end of the plate, complete connection with the rubber shell
- Coordination: terminals, plastic shell, needle base according to the same series of material selection
Parameters for type selection
When selecting the type, check the loop usage and space layout, and then check the spacing, component composition and installation type. The number and outlet direction are based on the drawing and Bill of material.
| Project | Explanation |
|---|---|
| Nominal spacing | 2.00mm |
| Components | terminal, plastic shell and needle base |
| Mounting type | through hole and Smt mounting type (according to series and material number) |
| Digit and wire gauge | check according to material number and drawing BOM, not according to general specification and so on |
| Series positioning | for small plate end and line end connection of the plate line docking, priority check with the series of material number and direction of line |
Application scenarios
This series is responsible for board-wire connection and wiring connection in structures such as small board-end and line-end connections. The specific connection position is determined according to the internal layout of the equipment.
- Butt joint of small plate and wire
- Internal terminal access of equipment
- Branch Line Connection of module
Part Number Composition and Purchase Verification
This page for JST 51005/51006 series 2.0 mm connector is used for series-level selection. After confirming the series and pitch, you still need to align each item including the specific part number, pin positions, installation type, and matching components before proceeding to request a quote or validate samples; the series page cannot replace the specific part number page.
| Verification Item | Specification on This Page |
|---|---|
| Series and Pitch | JST 51005/51006 series 2.0 mm connector, nominal pitch 2.00 mm; the exact part number should follow drawings or BOM |
| Component Composition | Terminal, housing, pin seat (for board-end applications may require additional parts; may include lock pieces depending on part number); select as a complete set from the same series |
| Installation Type | Through-hole or SMD, confirm according to series and part number |
| Pin Positions and Lead-Out Direction | Check according to part number, pin numbering, drawings, and BOM; do not infer based on generic pin positions |
| Crimping and Wire Gauge | Confirm according to terminal specification, conductor structure, and measured crimping range |
| Plating, Color, and Packaging | Confirm according to specific part number; series page does not replace part number page, specification, or sample |
| Substitution Boundary | Different series, different pin configurations, through-hole or surface-mount, with or without locks, that have the same spacing or similar appearance should not be interchanged based solely on appearance; terminals, housings, and sockets should be checked and matched as a complete set according to the same series part number. |
When requesting a quote, it is recommended to provide: target part number or compatible part number, number of pins, wire gauge and conductor structure, plating and color requirements, packaging method, estimated quantity, and delivery date. If any of these items are missing, first verify according to drawings or samples to avoid directly substituting with a similar series.
Inquiry and substitution
Drawings, Bom or samples can be provided for checking material number. Prices are enquired according to material number, quantity and delivery date. The substitute materials should be confirmed item by item according to the series structure, component composition and installation type, and should not be directly mixed across the series.
Related links: JST Series Connectors; JST Series Connectors Sourcing | PH·XH·SM·ZH·GH·VH Terminals & Housings; JST PH Series 2.0 mm connector; JST XH series 2.5 mm connector