JST PH Series 2.0 mm connector
Technical Specifications
Part Description JST PH series (per drawing / BOM)
Customer Part No. Per drawing / BOM
Drawing No. Per part number
Version Series overview
Date —

Dimensions

ItemValue
Pitch2.00 mm
ComponentsTerminal + Housing + Header
MountingThrough-hole / SMT (per series)

Product description

The JST PH series is a 2.00 mm pitch panel-to-wire connector assembly for signal and wiring connections between control panels and functional modules within small appliances and consumer electronics. This series is composed of crimping terminal, glue shell and plate pin seat. It is used for wire harness assembly after checking with drawing according to material number. In the wiring structure of small household appliances and consumer electronics, this series is used to match the connection point at the end of the board with the wiring harness branch.

Structure and form a complete set

The terminal is located at the end of the wire, the rubber shell is responsible for positioning and foolproof, and the needle base is fixed at the end of the plate. The relationship between the three is based on the series selection.

  • Wire Terminal: crimped on the end of the wire, into the plastic shell after the plate with the end of the needle base positioning
  • Rubber Shell: wraps and secures the terminals, providing docking guidance and foolproof construction
  • Needle Base: installed at the end of the plate, complete connection with the rubber shell
  • Coordination: terminals, plastic shell, needle base according to the same series of material selection

Parameters for type selection

When selecting the type, check the loop usage and space layout, and then check the spacing, component composition and installation type. The number and outlet direction are based on the drawing and Bill of material.

ProjectExplanation
Nominal spacing2.00mm
Componentsterminal, plastic shell and needle base
Mounting typethrough hole and Smt mounting type (according to series and material number)
Digit and wire gaugecheck according to material number and drawing BOM, not according to general specification and so on
Series positioningfor small household appliances and consumer electronics board line docking, priority check with the series material number and direction of the line

Application scenarios

This series is responsible for board and wire connection and wiring connection in the structures of small household appliances and consumer electronics, etc. The specific connection position is determined according to the internal layout of the equipment.

  • Interconnection of modules in small household appliances
  • Wiring for Consumer Electronic Control Panel
  • Signal connection between function board and daughter board

Part Number Composition and Purchase Verification

This page for JST PH Series 2.0 mm connector is used for series-level selection. After confirming the series and pitch, you still need to align each item including the specific part number, pin positions, installation type, and matching components before proceeding to request a quote or validate samples; the series page cannot replace the specific part number page.

Verification ItemSpecification on This Page
Series and PitchJST PH Series 2.0 mm connector, nominal pitch 2.00 mm; the exact part number should follow drawings or BOM
Component CompositionTerminal, housing, pin seat (for board-end applications may require additional parts; may include lock pieces depending on part number); select as a complete set from the same series
Installation TypeThrough-hole or SMD, confirm according to series and part number
Pin Positions and Lead-Out DirectionCheck according to part number, pin numbering, drawings, and BOM; do not infer based on generic pin positions
Crimping and Wire GaugeConfirm according to terminal specification, conductor structure, and measured crimping range
Plating, Color, and PackagingConfirm according to specific part number; series page does not replace part number page, specification, or sample
Substitution BoundaryDifferent series, different pin configurations, through-hole or surface-mount, with or without locks, that have the same spacing or similar appearance should not be interchanged based solely on appearance; terminals, housings, and sockets should be checked and matched as a complete set according to the same series part number.

When requesting a quote, it is recommended to provide: target part number or compatible part number, number of pins, wire gauge and conductor structure, plating and color requirements, packaging method, estimated quantity, and delivery date. If any of these items are missing, first verify according to drawings or samples to avoid directly substituting with a similar series.

Inquiry and substitution

During the type selection and confirmation stage, drawings or bill of material can be submitted to check the configuration. If an alternative type is required, the spacing, component composition and plate end installation method should be checked before use.

Related links: JST Series Connectors; JST Series Connectors Sourcing | PH·XH·SM·ZH·GH·VH Terminals & Housings; JST XH series 2.5 mm connector; JST SM series 2.5mm connector

Get a Quote Back to List