JST GH Series Plastic Housings|GHR-02V-S to GHR-15V-S Housings
Product Introduction
The JST GH series housings are used for 1.25mm pitch GH connector system wire-end housings, commonly part numbers range from GHR-02V-S to GHR-15V-S. After the housing is inserted with a crimped SSHL terminal, it plugs into the GH header on the board; the housing includes a safety latch and an anti-misinsert design.
Structure and Compatibility
The housing consists of a plastic shell, terminal retention structure, and latch. The terminal is held in the housing by the latch, and the locking structure outside the housing engages with the header; housings with different keying types and pin counts are not interchangeable, and both the pin count and keying identification must be checked when selecting a part.
Selection Parameters
The table below shows typical structural items and rated values from the JST public catalog. Specific pin counts, plating, packaging, and compatible wire gauges should follow the part specification.
| Item | Parameter/Typical Value |
|---|---|
| Nominal Pitch | 1.25 mm |
| Component | Wire-End Housing |
| Common Pin Counts | 2P–15P (according to part number) |
| Compatible Terminal | SSHL-002T-P0.2 |
| Compatible Header | BM02B-GHS-TBT / SM02B-GHS-TB |
| Latch | Safety locking structure |
| Keying | Confirm by part number/color |
| Packaging | Confirm by part number and order |
Common Part Number Examples
The following part numbers are used for inquiries and quotation communication and do not represent the full supply range; the actual details should be confirmed with drawings, BOM, or samples.
| Part Number Example | Description | Compatibility/Pin |
|---|---|---|
| GHR-02V-S | GH Housing, 2P | SSHL Terminal / GH Socket |
| GHR-03V-S | GH Housing, 3P | SSHL Terminal / GH Socket |
| GHR-04V-S | GH Housing, 4P | SSHL Terminal / GH Socket |
| GHR-06V-S | GH Housing, 6P | SSHL Terminal / GH Socket |
| GHR-10V-S | GH Housing, 10P | SSHL Terminal / GH Socket |
| GHR-15V-S | GH Housing, 15P | SSHL Terminal / GH Socket |
Application Scenarios
GH housings are used for 1.25mm wire-end connections in devices such as monitors, tablets, and camera modules.
- Internal wiring of LCD/PDP
- Camera module wire ends
- High-density wiring for small devices
Inquiry and Substitution
For inquiries, please provide the housing part number, pin count, keying type, color, and quantity; for substitutions, first check pin count, latch shape, keying position, and socket compatibility.
Related links: JST GH Series Page; JST Series Connector Categories; Agency Part Number Index; Terminal / Housing Selection Guide.