JST PA series 2.0 mm connector
Technical Specifications
Part Description JST PA series (per drawing / BOM)
Customer Part No. Per drawing / BOM
Drawing No. Per part number
Version Series overview
Date —

Dimensions

ItemValue
Pitch2.00 mm
ComponentsTerminal + Housing + Header
MountingThrough-hole / SMT (per series)

Product description

JST PA series for 2.00 mm pitch connector, common in home appliances and office equipment internal wiring, board and wire between the signal and connection docking. The Assembly is composed of terminal, rubber shell and needle base. The installation type is distinguished according to series and material number. Check is based on drawing and Bom. In the wiring structure of the internal wiring of household appliances and office equipment, this series is used to correspond the connection point at the end of the board to the branch of the harness.

Structure and form a complete set

The connector is composed of crimping terminal, rubber shell and pin seat. Each component is selected according to the same series of material number. Before Assembly, it is necessary to check the positioning direction of wire crimping and rubber shell.

  • Wire Terminal: crimped on the end of the wire, into the plastic shell after the plate with the end of the needle base positioning
  • Rubber Shell: wraps and secures the terminals, providing docking guidance and foolproof construction
  • Needle Base: installed at the end of the plate, complete connection with the rubber shell
  • Coordination: terminals, plastic shell, needle base according to the same series of material selection

Parameters for type selection

When selecting the type, check the loop usage and space layout, and then check the spacing, component composition and installation type. The number and outlet direction are based on the drawing and Bill of material.

ProjectExplanation
Nominal spacing2.00mm
Componentsterminal, plastic shell and needle base
Mounting typethrough hole and Smt mounting type (according to series and material number)
Digit and wire gaugecheck according to material number and drawing BOM, not according to general specification and so on
Series positioningfor home appliances and office equipment internal wiring board line docking, priority check with the series material number and direction of the wire

Application scenarios

This series undertakes board-wire docking and wiring connection in the structure of internal wiring of household appliances and office equipment, and the specific access position is determined according to the internal layout of the equipment.

  • Wiring for control panel of household appliances
  • Internal interconnection of office equipment
  • Connection docking between modules

Part Number Composition and Purchase Verification

This page for JST PA series 2.0 mm connector is used for series-level selection. After confirming the series and pitch, you still need to align each item including the specific part number, pin positions, installation type, and matching components before proceeding to request a quote or validate samples; the series page cannot replace the specific part number page.

Verification ItemSpecification on This Page
Series and PitchJST PA series 2.0 mm connector, nominal pitch 2.00 mm; the exact part number should follow drawings or BOM
Component CompositionTerminal, housing, pin seat (for board-end applications may require additional parts; may include lock pieces depending on part number); select as a complete set from the same series
Installation TypeThrough-hole or SMD, confirm according to series and part number
Pin Positions and Lead-Out DirectionCheck according to part number, pin numbering, drawings, and BOM; do not infer based on generic pin positions
Crimping and Wire GaugeConfirm according to terminal specification, conductor structure, and measured crimping range
Plating, Color, and PackagingConfirm according to specific part number; series page does not replace part number page, specification, or sample
Substitution BoundaryDifferent series, different pin configurations, through-hole or surface-mount, with or without locks, that have the same spacing or similar appearance should not be interchanged based solely on appearance; terminals, housings, and sockets should be checked and matched as a complete set according to the same series part number.

When requesting a quote, it is recommended to provide: target part number or compatible part number, number of pins, wire gauge and conductor structure, plating and color requirements, packaging method, estimated quantity, and delivery date. If any of these items are missing, first verify according to drawings or samples to avoid directly substituting with a similar series.

Inquiry and substitution

Drawings, Bom or samples can be provided for checking material number. Prices are enquired according to material number, quantity and delivery date. The substitute materials should be confirmed item by item according to the series structure, component composition and installation type, and should not be directly mixed across the series.

Related links: JST Series Connectors; JST Series Connectors Sourcing | PH·XH·SM·ZH·GH·VH Terminals & Housings; JST PHD series 2.0 mm connector; JST SPH series 2.0mm connector

Get a Quote Back to List