JST SHD Terminal SSH-003GA-P0.2|1.0mm Double-Row Crimp Terminal
Product Introduction
SSH-003GA-P0.2 is a double-row wire crimp terminal from the JST SHD series with a 1.0mm pitch. After crimping AWG32–28 wires, the terminals are inserted into SHDR housings and then mated with BM/SM series SRDS board connectors. SHD is intended for low-voltage signal connections in small electronic devices, display modules, and compact motherboards. The terminal and housing are small in size, suitable for high-density wiring. This page is organized by specific terminal part numbers for convenient purchasing, BOM verification, and replacement communication.
Structure and Matching
The terminals consist of a crimping area, a box-type contact part, and an anti-deformation structure. The contact part is made of phosphor bronze with nickel undercoating and gold plating on the mating area to reduce contact resistance; the crimping area covers both the conductor and insulation, and after being inserted into the housing, it is secured by the housing latch. SHD terminals are only compatible with SHDR housings and SRDS connectors and cannot be used interchangeably with SH series terminals, housings, or connectors of the same 1.0mm pitch.
Selection Parameters
The table below is compiled from publicly available samples and catalogs; specific plating, pin positions, packaging, and compatible wire gauges should be confirmed with part drawings, specifications, or samples.
| Item | Parameter/Description |
|---|---|
| Series | JST SHD |
| Nominal Pitch | 1.0 mm |
| Number of Rows | Double Row |
| Specific Part Number | SSH-003GA-P0.2 |
| Applicable Wire Gauge | AWG32–28 |
| Conductor Cross-Section | 0.032–0.08 mm² |
| Insulation Outer Diameter | 0.4–0.8 mm |
| Rated Current | 1.0 A AC/DC (AWG28) |
| Rated Voltage | 50 V AC/DC |
| Contact Resistance | Initial 20 mΩ max; After Environmental Test 40 mΩ max |
| Terminal Material/Plating | Phosphor Bronze, nickel undercoat, gold plating on mating part |
| Packing | 23,000 pcs/ reel (open catalog) |
Part Numbers and Matching in the Same Series
The following part numbers are for search, matching verification, and quotation communication purposes, and do not represent the entire supply range.
| Part Number | Description | Compatibility / Usage |
|---|---|---|
| SSH-003GA-P0.2 | SHD crimp terminal, AWG32–28, gold-plated | SHDR housing / SRDS socket |
| SHDR-20V-S-B | SHD 20P dual-row housing, with flange | 20P SRDS socket |
| SHDR-30V-S-B | SHD 30P dual-row housing, with flange | 30P SRDS socket |
| SHDR-40V-S-B | SHD 40P dual-row housing, with flange | 40P SRDS socket |
| SHDR-50V-S-B | SHD 50P dual-row housing, with flange | 50P SRDS socket |
| BM20B-SRDS-G-TF | SHD 20P top-entry SMT socket | SHDR-20V-S-B |
| SM20B-SRDS-G-TF | SHD 20P side-entry SMT socket | SHDR-20V-S-B |
Application Scenarios
SHD terminals are used for 1.0mm dual-row wire-end connections in small electronic devices, display modules, and compact motherboards.
- Display internal module signal lines
- Connection of portable device board wires and harnesses
- Low-voltage wiring for compact control boards
Inquiry and Replacement
For inquiries, please provide terminal part number, wire gauge, insulation outer diameter, plating, reel quantity, and lead time; when replacing, first check the crimping range, contact plating, housing latch, and compatibility with SRDS sockets, and do not directly replace with the same pitch.
Related links: JST SHD Series Page; SHD Terminal Assemblies Page; SHD Housings Page; SHD Sockets Page; JST Agency Column; Agency Part Number Index.