JST SHD Series Terminal|SSH-003GA-P0.2 Crimp Terminal
Technical Specifications
Part Description SSH-003GA-P0.2
Customer Part No. Per drawing / BOM
Drawing No. Per drawing / BOM
Version Component overview
Date —

Dimensions

ItemValue
Pitch1.0 mm
RowsDual row
Wire RangeAWG32–28

Product Introduction

The JST SHD series terminals are used for wire crimping in the 1.0mm pitch SHD dual-row connection system. A commonly found part number in the public catalog is SSH-003GA-P0.2. After crimping AWG32–28 wires, the terminals are inserted into SHDR housings and then mated with BM/SM series SRDS receptacles. The SHD is designed as a small, low-profile, dual-row high-density connector. Its compact terminals are suitable for internal wiring of display modules, portable devices, and compact control boards.

Structure and Compatibility

The terminal consists of a crimp area, a box-shaped contact section, and an anti-deformation structure. The contact section is made of phosphor bronze with nickel undercoating and gold plating. The crimp area encloses the conductor and insulation; after being inserted into the housing, it is secured by the housing latch. SHD terminals are only compatible with SHDR housings and SRDS receptacles and cannot be mixed with SH series terminals or housings at the 1.0mm pitch.

Selection Parameters

The table below lists the typical structural items and rated values from the JST public catalog. Specific pin counts, plating, packaging, and applicable wire gauges should refer to the part specification.

ItemParameter/Typical Value
Nominal Pitch1.0 mm
RowsDual Row
ComponentCrimp Terminal
Common Part NumberSSH-003GA-P0.2
Compatible HousingSHDR-20V-S-B ... SHDR-50V-S-B
Compatible Pin HeaderBM20B-SRDS-G-TF / SM20B-SRDS-G-TF
Applicable Wire GaugeAWG32–28
Insulation Outer Diameter0.4–0.8 mm
Rated Current/Voltage1 A / 50 V (AWG28, Typical Catalog Value)
Terminal Material/PlatingPhosphor Bronze, Nickel Base with Gold Plating

Common Part Number Examples

The following part numbers are for searching and inquiry communication purposes only and do not represent the full supply range; the actual items should be confirmed based on drawings, BOM, or samples.

Part Number ExampleDescriptionCompatible / Pin Position
SSH-003GA-P0.2SHD crimp terminal, AWG32–28, gold-platedSHDR housing / SRDS socket
SSH-003GA-P0.2 ReelReel quantity confirmed according to catalog and orderAutomatic crimping equipment
Other plating/packagingConfirmed according to drawings or BOMSame series housing

Application Scenarios

SHD terminals are used for 1.0mm dual-row wire-end connections in small electronic devices, display modules, and compact mainboards.

  • Internal wiring of display modules
  • Board-to-board connections in portable devices
  • Signal lines on compact control boards

Inquiry and Replacement

For inquiries, please provide terminal part number, wire gauge, insulation outer diameter, plating, packaging, and quantity; for replacement, first check the crimp range, contact plating, housing latch, and compatibility with SRDS sockets.

Related links: JST SHD series page; JST connector series category; Agency part number index; Terminal/Housing selection guide.

Get a Quote Back to List