JST SHD Series 1.0mm Double Row Connector
Technical Specifications
Part Description SHDR / BM20B-SRDS / SM20B-SRDS
Customer Part No. Per drawing / BOM
Drawing No. Per drawing / BOM
Version Component overview
Date —

Dimensions

ItemValue
Pitch1.0 mm
Circuits20 / 30 / 40 / 50

Product Introduction

The JST SHD series is a 1.0mm pitch, dual-row, crimp-style wire-to-board connector, commonly available with 20, 30, 40, and 50 pins. This series controls the board space with a mounting height of 6.3mm (top entry) and 5.5mm (side entry), and an approximate width of 5.0mm, making it suitable for internal wiring of small electronic devices, display modules, and compact motherboards. The terminals have a gold-plated nickel base structure, and the pin header is SMT mounted with a vacuum absorption design, facilitating automated placement.

Series Structure and Matching

SHD consists of three parts: wire-end terminals, dual-row housings, and board-end SMT pin headers. After crimping, the terminals are inserted into SHDR housings, which then plug into SRDS series pin headers; the housings have protrusions on both ends, making it easier for operators to remove them without pulling on the wires. The four-sided guards of the pin headers have anti-misinsert slots, and the headers are available in top-entry and side-entry directions to fit different board spaces. SHD is PCB-layout compatible with SHLD and can be evaluated as a replacement at the same board site, but the terminals, housings, and pin headers still need to be matched according to the series.

Selection Parameters

The table below shows typical structural items and ratings from JST's public catalog. Specific pin counts, plating, packaging, and compatible wire gauges are subject to the part number specifications.

ItemParameter/Typical Value
Nominal Pitch1.0 mm
Number of RowsDouble row
Common Pin Counts20 / 30 / 40 / 50
Rated Current1 A AC/DC (AWG28)
Rated Voltage50 V AC/DC
Applicable Wire GaugeAWG32–28
Insulation Outer Diameter0.4–0.8 mm
Mounting Height6.3 mm (top) / 5.5 mm (side entry)
Pin Housing MountingSMT, top/side entry
Terminal PlatingNickel underplate with gold plating
Reference StandardUL E60389 / CSA LR20812

Common Part Numbers and Pin Counts

The following part numbers are provided for search and inquiry communication purposes and do not represent the full supply range; please confirm with drawings, BOM, or samples for actual use.

Part Number ExampleDescriptionCompatible / Pin Position
SSH-003GA-P0.2SHD gold-plated crimp terminal, AWG32–28SHDR housing
SHDR-20V-S-BSHD dual-row housing, 20P, with flangeSSH terminal / SRDS socket
SHDR-50V-S-BSHD dual-row housing, 50P, with flangeSSH terminal / SRDS socket
BM20B-SRDS-G-TFSHD top-entry SMT socket, 20PSHDR housing
SM20B-SRDS-G-TFSHD side-entry SMT socket, 20PSHDR housing
BM20B-SRDS-A-G-TFSHD top-entry SMT socket, 20P, with bossSHDR housing

Component Page and Application Scenarios

SHD is suitable for high-density internal connections in small electronic devices, display modules, and compact motherboards.

Inquiry and Replacement

For inquiries, please provide the series, number of pins, top or side entry, whether it has a boss, packaging, and quantity; for replacements, first check the terminal crimping range, housing locks, header height, and SMT layout.

Related links: JST SHD Series Page; JST Series Connector Categories; Agency Part Number Index; Terminal/Housing Selection Guide.

Get a Quote Back to List