JST ZH Series Terminal Block | B2B-ZR Board-End Terminal Block
Product Introduction
The JST ZH series pin header is mounted on the PCB end and mates with ZHR housings. Common part numbers include B2B-ZR through-hole type, B2B-ZR-3.4 long leg type, and B2B-ZR-SM4-TF SMT type. The pin header comes with a full shroud, suitable for low-profile, compact board-end layouts.
Structure and Matching
The pin header consists of a plastic housing, pins, and solder terminals. The through-hole type is suitable for conventional wave soldering or manual soldering, while the SMT type is suitable for automated placement; the shroud provides mating guidance and prevents mis-insertion, and the pins contact the terminals inside the ZHR housing.
Selection Parameters
The table below shows typical structural items and rated values from JST public catalogs. Specific pin counts, plating, packaging, and compatible wire gauges are subject to the part number datasheet.
| Item | Parameter/Typical Value |
|---|---|
| Nominal Pitch | 1.5 mm |
| Component | Board-end Pin Header |
| Common Pin Counts | 2P–13P (depends on part number) |
| Mounting | Through-hole / SMT (depends on part number) |
| Compatible Housing | ZHR-2 ... ZHR-13 |
| Compatible Terminal | SZH-002T-P0.5 / SZH-003T-P0.5 |
| Rated Current/Voltage | 1.0 A / 50 V (typical value from public catalog) |
| Packaging | Bag/Reel, confirm per part number |
Common Part Number Examples
The following part numbers are used for retrieval and quotation communication and do not represent the full supply range; the actual reference should be based on drawings, BOM, or samples.
| Part Number Example | Description | Compatibility/Pin Count |
|---|---|---|
| B2B-ZR | ZH Through-hole Pin Header, 2P | ZHR Housing |
| B3B-ZR | ZH Through-hole Pin Header, 3P | ZHR Housing |
| B4B-ZR | ZH Through-hole Pin Header, 4P | ZHR Housing |
| B6B-ZR | ZH Through-hole Pin Header, 6P | ZHR Housing |
| B10B-ZR | ZH Through-hole Pin Header, 10P | ZHR Housing |
| B2B-ZR-SM4-TF | ZH SMT Pin Header, 2P | ZHR Housing |
Application Scenarios
ZH pin headers are used for board-end connections in small electronic devices, display modules, and consumer electronics.
- Small device board-end interfaces
- Display module motherboard connections
- Low-profile board-end layouts
Quotation and Alternatives
For quotations, please provide the pin header part number, pin count, through-hole or SMT, packaging, and quantity; for alternatives, first check pin header height, pads, cover direction, and housing latch.
Related links: JST zh series page; JST series connector categories; Agency part number index; Terminal/house selection guide.