JST XH Series Terminals|SXH-001T-P0.6 Crimp Terminal
Technical Specifications
Part Description SXH-001T-P0.6
Customer Part No. Per drawing / BOM
Drawing No. Per drawing / BOM
Version Component overview
Date —

Dimensions

ItemValue
Pitch2.50 mm
ComponentCrimp terminal

Product Introduction

The JST XH series terminals are used for crimping wire ends to a 2.50mm pitch XH connection system, with the common part number being SXH-001T-P0.6. After crimping, the terminals are inserted into XH housings and then mated with XH board-side pin headers. When selecting, first check the wire gauge, strip length, crimp height, and plating requirements.

Structure and Matching

The terminal consists of a crimp area, a spring piece, and an insertion structure, with the crimp area covering both the conductor and the insulation; the spring piece provides contact pressure inside the housing. XH terminals must be used with XH housings and pin headers of the same series and cannot be substituted solely based on a 2.5mm pitch.

Selection Parameters

The table below lists publicly available structural items. Specific pin positions, plating, packaging, and compatible wire gauges should be confirmed with the part number and drawings.

ItemParameter
Nominal Pitch2.50 mm
ComponentWire-end crimp terminal
Compatible HousingXH Series
Compatible Pin HeaderXH Series Board-side Pin Header
Compatible Wire GaugeConfirm according to terminal part number and specification
Plating/PackagingConfirm according to part number and order

Common Part Number Examples

The following part numbers are for reference when searching and requesting quotations and do not represent the full supply range; for actual verification, refer to drawings, BOM, or samples.

Part Number ExampleDescriptionCompatibility / Pin Count
SXH-001T-P0.6XH series crimp terminal, common tin plating, reel/bulk according to orderXH housing
Terminals by part numberOther platings, packaging or wire gauges according to drawings/BOMXH housing

Application Scenarios

XH terminals are used for 2.5mm board-to-wire connections in home appliances, power signals, and internal equipment wiring.

  • Interconnection between appliance control board and power board
  • Internal signal and low-voltage wiring in devices
  • Wire crimping with XH housing and pin receptacle

Inquiry and Substitution

For inquiries, please provide terminal part number, wire gauge, plating, packaging, and quantity; for substitutions, first check the crimp range, contact structure, and housing/pin receptacle matching.

Related links: JST XH Series Page; JST Series Connector Categories; Agency Part Number Index; Terminal/Housing Selection Guide.

Get a Quote Back to List