JST XA Series Terminal|SXA-001T-P0.6 Crimp Terminal
Technical Specifications
Part Description SXA-001T-P0.6 / SXA-01T-P0.6
Customer Part No. Per drawing / BOM
Drawing No. Per drawing / BOM
Version Component overview
Date —

Dimensions

ItemValue
Pitch2.5 mm
Wire RangeAWG28–20

Product Introduction

The JST XA series terminals are used for crimping wire ends in the 2.5mm pitch XA wire-to-board connection system. Common part numbers include SXA-001T-P0.6, SXA-01T-P0.6, and the low-insertion-force type SXA-001T-P0.6L. After crimping the terminals onto wires, they are inserted into XAP housings and then mated with board-side connectors such as B02B-XASK-1. The XA series features a safety locking structure and is suitable for internal wiring in home appliances, power supplies, and industrial control systems.

Structure and Compatibility

The terminal consists of a crimping section, a box-type contact spring, and an anti-deformation structure. The crimping section covers both the conductor and insulation and is secured by the housing latch after being inserted into the housing. Terminals can only be used with XA series housings and receptacles and should not be mixed across series based solely on the 2.5mm pitch.

Selection Parameters

The table below lists typical structural items and rated values from the JST publicly available catalog. For specific pin positions, plating, packaging, and compatible wire gauges, refer to the part number specification sheet.

ItemParameter/Typical Value
Nominal Pitch2.5 mm
ComponentWire-end Crimp Terminal
Compatible HousingXAP-02V-1 ... XAP-15V-1
Compatible ReceptacleB02B-XASK-1 / S02B-XASS-1
Applicable Wire GaugeAWG28–20 (by part number)
Insulation Outer Diameter0.8–1.9 mm (SXA-001T-P0.6)
Rated Current/Voltage3 A / 250 V (typical value in public catalog)
Plating/PackagingTinned, Reel, Confirm by part number

Common Part Number Examples

The following part numbers are for search and inquiry communication, and do not represent the entire supply range; the actual details should be verified with drawings, BOM, or samples.

Part Number ExampleDescriptionCompatible / Pin Housing
SXA-001T-P0.6XA Crimp Terminal, AWG28–22, Tin PlatedXAP Housing / XASK Socket
SXA-01T-P0.6XA Crimp Terminal, AWG24–20, Tin PlatedXAP Housing / XASK Socket
SXA-001T-P0.6LXA Low Insertion Force Terminal, AWG26–22XAP Housing / XASK Socket

Application Scenarios

XA terminals are used for 2.5mm wire-to-board connections in home appliances, power boards, industrial control, and office equipment.

  • Internal wiring of home appliance control boards
  • Interconnection between power boards and load boards
  • Signal connection of industrial control boards

Quotation and Replacement

For a quotation, please provide the terminal part number, wire gauge, insulation outer diameter, plating, packaging, and quantity; for replacement, first confirm the crimping range, locking structure, and XAP housing/XASK socket compatibility.

Related links: JST XA series page; JST connector series classification; Agency part number index; Terminal/Housing Selection Guide.

Get a Quote Back to List