JST PUD Series Terminals|SPUD-001T-P0.5 Crimp Terminal
Product Introduction
The JST PUD series terminals are used for crimping wire ends on the 2.0mm pitch PUD dual-row connector system. Common catalog part numbers are SPUD-001T-P0.5 and SPUD-002T-P0.5. SPUD-001T-P0.5 fits AWG26–22 with an insulated outer diameter of 0.95–1.5mm; SPUD-002T-P0.5 fits AWG28–24 with an insulated outer diameter of 0.76–1.5mm. After crimping, the terminals are inserted into the PUDP housing and then mated with the PUDSS socket.
Structure and Compatibility
The terminals consist of a crimping area, a box-shaped contact part, and an anti-deformation structure. The contact part is made of copper alloy with tin plating and reflow treatment. PUD uses a dual-row arrangement, with terminals positioned and locked in two rows inside the housing. The terminal, housing, and socket must all be from the PUD series and cannot be mixed with PHD or PA series even if the pitch is 2.0mm.
Selection Parameters
The table below lists typical structural items and rated values from the JST public catalog. Specific pin positions, plating, packaging, and compatible wire gauges should follow the part number specifications.
| Item | Parameter/Typical Value |
|---|---|
| Nominal Pitch | 2.0 mm |
| Number of Rows | Double Row |
| Component | Wire End Crimp Terminal |
| Compatible Housing | PUDP-08V-S ... PUDP-40V-S |
| Compatible Socket | B08B-PUDSS / S08B-PUDSS-1 / BM10B-PUDSS-TFC |
| SPUD-001T-P0.5 | AWG26–22, Insulation Outer Diameter 0.95–1.5 mm |
| SPUD-002T-P0.5 | AWG28–24, Insulation Outer Diameter 0.76–1.5 mm |
| Rated Current/Voltage | 3 A / 250 V (AWG22, typical value in public catalog) |
| Terminal Material/Plating | Copper Alloy, Tin Plated (Reflow) |
Common Part Number Examples
The following part numbers are for search and inquiry communication purposes only and do not represent the full supply range; the actual supply should be verified with drawings, BOM, or samples.
| Part Number Example | Description | Compatible / Pin Type |
|---|---|---|
| SPUD-001T-P0.5 | PUD crimp terminal, AWG26–22, tin-plated | PUDP housing / PUDSS socket |
| SPUD-002T-P0.5 | PUD crimp terminal, AWG28–24, tin-plated | PUDP housing / PUDSS socket |
| Other plating/packaging | Confirm according to drawing or BOM | Same series dual-row housing |
Application Scenarios
PUD terminals are used for 2.0mm dual-row wire-end connections in industrial control, automotive electronics, audio/video, and home appliance equipment.
- Industrial control dual-row harnesses
- Internal wiring for automotive electronics
- Board-to-board connections in audio/video equipment
Inquiry and Replacement
For inquiries, please provide the terminal part number, wire gauge, insulation outer diameter, plating, packaging, and quantity; for replacements, first verify the crimp range, dual-row arrangement, and housing latch compatibility with PUDSS sockets.
Related links: JST PUD Series Page; JST Connector Series Categories; Agency Part Number Index; Terminal/Housing Selection Guide.