JST SH Series Terminal|SSH-003T-P0.2 Crimp Terminal
Technical Specifications
Part Description SSH-003T-P0.2
Customer Part No. Per drawing / BOM
Drawing No. Per drawing / BOM
Version Component overview
Date —

Dimensions

ItemValue
Pitch1.00 mm
ComponentCrimp terminal

Product Introduction

The JST SH series terminals are used for wire crimping in the 1.00mm pitch SH connector system, with common part numbers such as SSH-003T-P0.2. The terminal size is relatively small, so during crimping, the stripping length, crimp height, and insertion depth must be controlled. After being inserted into the SH housing, it mates with the board-end SH receptacle.

Structure and Matching

The terminal consists of a small crimp area, a spring piece, and an insertion guide structure. Due to the small pitch, terminal crimping deviations more easily affect insertion and contact. Terminals must match with SH housings and receptacles of the same series and cannot be intermixed across different series with 1.0mm pitch.

Selection Parameters

The table below shows publicly available structural items. Specific pin numbers, plating, packaging, and compatible wire gauges should follow the part number and datasheet.

ItemParameter
Nominal Pitch1.00 mm
ComponentWire Crimp Terminal
Compatible HousingSH Series
Compatible ReceptacleSH Series Board-End Receptacle
Compatible Wire GaugeThin wire, confirmed according to terminal part number and datasheet
Plating/PackagingConfirmed according to part number and order

Common Part Number Examples

The following part numbers are for reference in searches and quotation communications and do not represent the entire supply range; the actual supply should be verified by drawings, BOM, or samples.

Part Number ExampleDescriptionCompatibility/Pin Position
SSH-003T-P0.2SH series crimp terminals, fine wire gauge, reel/bulk according to orderSH housing
Terminals by part numberOther plating, packaging, or wire gauge according to drawings/BOMSH housing

Application Scenarios

SH terminals are used for 1.0mm board-to-wire connections in small devices, camera modules, and portable devices.

  • High-density wiring inside small devices
  • Leads for camera and sensor modules
  • Crimping wires to SH housings and terminals

Inquiry and Replacement

For inquiries, please provide the terminal part number, wire gauge, plating, and packaging; for replacements, first verify crimping range, terminal dimensions, and housing/terminal compatibility.

Related Links: JST SH Series Page; JST Series Connector Categories; Distributor Part Number Index; Terminal/Housing Selection Guide.

Get a Quote Back to List