JST PUD Terminal SPUD-001T-P0.5|2.0mm Double Row 26–22AWG Crimp Terminal
Product Introduction
The SPUD-001T-P0.5 is a JST PUD series 2.0mm pitch, double-row crimp terminal, suitable for AWG26–22, conductor cross-section 0.13–0.33mm², and insulated wire diameter 0.95–1.5mm. After crimping, the terminals are housed in a PUDP housing and then mated with the B/S series PUDSS board pin header. PUD features a double-row, low insertion force, and secure locking structure, making it suitable for stable connections under conditions of vibration, clamping, and dry circuits. This page is organized by specific terminal part numbers to facilitate harness processing and BOM verification.
Structure and Matching
The terminal consists of a crimp area, box-shaped contact area, and anti-deformation structure. The contacts are made of copper alloy, tin-plated, and reflow-treated. The crimp area covers the conductor and insulation, and once inserted into the housing, it is fixed by the housing latch. The PUD housing has a safety latch, and the pin header has an anti-mismating key; terminals are only compatible with PUDP housings and PUDSS pin headers and cannot be mixed with PHD or PA series even if the pitch is the same 2.0mm. The difference between SPUD-001T and SPUD-002T mainly lies in the applicable wire gauge and insulation diameter range.
Selection Parameters
The table below is organized according to the public catalog and drawings. Specific plating, pin positions, color, packaging, and compatible wire gauge should be based on the part number specification sheet, drawings, or samples.
| Item | Parameter/Description |
|---|---|
| Series | JST PUD |
| Nominal Pitch | 2.0 mm |
| Number of Rows | Double Row |
| Specific Part Number | SPUD-001T-P0.5 |
| Applicable Wire Gauge | AWG26–22 |
| Conductor Cross-Section | 0.13–0.33 mm² |
| Insulation Outer Diameter | 0.95–1.5 mm |
| Rated Current | 3 A AC/DC (AWG22) |
| Rated Voltage | 250 V AC/DC |
| Operating Temperature | -25~85℃ |
| Contact Resistance | Initial 10 mΩ max; 20 mΩ max after environmental tests |
| Insulation Resistance | 1,000 MΩ min |
| Withstand Voltage | 800 V AC / minute |
| Terminal Material/Plating | Copper Alloy, Tin Plated (Reflow Process) |
| Packaging | 8,000 pcs/reel (public catalog) |
Same Series Part Numbers and Compatibility
The following part numbers are used for retrieval, matching verification, and inquiry communication, and do not represent the full supply scope.
| Part Number | Description | Compatibility / Use |
|---|---|---|
| SPUD-001T-P0.5 | PUD terminal, AWG26–22, insulation outer diameter 0.95–1.5mm | PUDP housing / PUDSS pin socket |
| SPUD-002T-P0.5 | PUD terminal, AWG28–24, insulation outer diameter 0.76–1.5mm | PUDP housing / PUDSS pin socket |
| PUDP-08V-S | 8P dual-row housing, natural color | B08B-PUDSS / S08B-PUDSS-1 |
| B08B-PUDSS | 8P top-entry through-hole pin socket, without protrusion | PUDP-08V-S |
| B08B-PUDSS-1 | 8P top-entry through-hole pin socket, with protrusion | PUDP-08V-S |
| S08B-PUDSS-1 | 8P side-entry through-hole pin socket, with protrusion | PUDP-08V-S |
Application Scenarios
Typical scenarios suitable for board-to-wire connections in home appliance control boards, display devices, and industrial control boards include:
- Board-to-board connections for home appliance control boards, display devices, and industrial control boards
- Internal wiring harnesses requiring double-row 2.0mm high-density wiring
- Connection points subject to vibration, pinching, or dry circuit conditions
Inquiry and Substitution
For inquiries, please provide the terminal part number, wire gauge, insulation outer diameter, plating, reel quantity, and delivery time; for substitutions, check the crimping range, contact plating, housing latch, and compatibility with PUDSS headers, and do not directly replace with the same 2.0mm pitch.
Related links: PUD Series Page; PUD Terminals Page; PUD Housings Page; PUD Headers Page; JST Agency Section; Agency Part Number Index; Terminal, Housing, and Header Selection Guide.