JST PHD Series Pin Header|B08B-PHDSS Dual Row Board-End Pin Header
Product Introduction
The JST PHD series socket is mounted at the PCB end and mates with the PHDR dual-row housing. Common part numbers are B08B-PHDSS (top entry) and S08B-PHDSS (side entry). The socket features a dual-row, fully shielded, low-profile structure, with a mounting height of approximately 8.8mm and a depth of approximately 5.0mm, suitable for high-density board-end layouts.
Structure and Compatibility
The socket consists of a plastic housing, dual-row pins, and a full shield. The top-entry type is suitable for locations with more board space, while the side-entry type is suitable for slim devices. The four-sided shield provides mating guidance and reduces foreign object intrusion, while the pins contact the terminals inside the PHDR housing.
Selection Parameters
The table below shows typical structural items and rated values from JST public catalogs. Specific pin counts, plating, packaging, and compatible wire gauges are subject to the part number datasheet.
| Item | Parameter/Typical Value |
|---|---|
| Nominal Pitch | 2.0 mm |
| Number of Rows | Dual row |
| Component | PCB-end socket |
| Common Pin Counts | 8P–34P, even numbers (per part number) |
| Mounting | Through-hole, top entry/side entry |
| Compatible Housing | PHDR-08VS ... PHDR-34VS |
| Compatible Terminals | SPHD-001T-P0.5 / SPHD-002T-P0.5 |
| Rated Current/Voltage | 3 A / 250 V (typical value from public catalog) |
Common Part Number Examples
The following part numbers are for reference and inquiry communication and do not represent the full supply range; the actual parts should be verified against drawings, BOMs, or samples.
| Part Number Example | Description | Compatible / Pin Position |
|---|---|---|
| B08B-PHDSS | PHD top-entry dual-row socket, 8P | PHDR housing |
| B10B-PHDSS | PHD top-entry dual-row socket, 10P | PHDR housing |
| B12B-PHDSS | PHD top-entry dual-row socket, 12P | PHDR housing |
| B16B-PHDSS | PHD top-entry dual-row socket, 16P | PHDR housing |
| B20B-PHDSS | PHD top-entry dual-row socket, 20P | PHDR housing |
| S08B-PHDSS | PHD side-entry dual-row socket, 8P | PHDR housing |
Applications
PHD sockets are used for high-density board ends, dual-row multi-circuit, and low-profile device board connections.
- High-density motherboard edge interfaces
- Dual-row multi-circuit connections
- Low-profile device side-entry layouts
Inquiry and Substitution
For inquiries, please provide the socket part number, pin count, top-entry or side-entry, packaging, and quantity; for substitution, first verify the socket height, dual-row pins, shroud orientation, and housing latch.
Related links: JST PhD series page; JST series connector categories; Agency part number index; Terminal/Housing selection guide.