JST PH Series Terminal|SPH-002T-P0.5S Crimp Terminal
Technical Specifications
Part Description SPH-002T-P0.5S / SPH-002T-P0.5L
Customer Part No. Per drawing / BOM
Drawing No. Per drawing / BOM
Version Component overview
Date —

Dimensions

ItemValue
Pitch2.00 mm
ComponentCrimp terminal

Product Introduction

The JST PH series terminals are used for crimping wire ends in the 2.00mm pitch PH connector system. Common part numbers include SPH-002T-P0.5S and SPH-002T-P0.5L. After crimping the terminal onto the wire end, it is inserted into the PH housing and then mated with the board-end PH socket; when selecting, first confirm the wire gauge, stripping length, and crimp height, then check the plating and packaging type.

Structure and Compatibility

The terminal consists of a crimping section, a spring contact, and an entry structure; the crimping section covers the conductor and insulation, and the spring contact provides contact pressure once inserted into the housing. Terminals must be used with housings and sockets of the same series and cannot be mixed across series based solely on the 2.0mm pitch.

Selection Parameters

The table below shows public structural items; specific pin counts, plating, packaging, and compatible wire gauges should be confirmed according to the part number and drawings.

ItemParameter
Nominal Pitch2.00 mm
ComponentWire-end crimp terminal
Compatible HousingPH / PHB series
Compatible SocketPH series board-end socket
Compatible Wire GaugeConfirm according to terminal part number and specifications
Plating/PackagingConfirm according to part number and order

Common Part Number Examples

The following part numbers are for search and inquiry communication purposes and do not represent the full supply range; the actual selection should be verified with drawings, BOM, or samples.

Part Number ExampleDescriptionCompatible / Pin Type
SPH-002T-P0.5SPH series crimp terminals, commonly tin-plated, tape/reel or bulk according to orderPH / PHB housing
SPH-002T-P0.5LPH series crimp terminals, commonly tin-plated, tape/reel or bulk according to orderPH / PHB housing
Terminals by part numberOther platings, packaging, or wire gauges according to drawings/BOMSame series housing

Application Scenarios

PH terminals are used for 2.0mm board-to-wire connections in small household appliances, consumer electronics, and internal device wiring.

  • Interconnection of small appliance control boards and modules
  • Internal signal wiring of consumer electronics
  • Crimping wires with PH housings and pin connectors

Quotation and Substitution

For a quotation, please provide the terminal part number, wire gauge, plating, packaging, and quantity; for substitution, first check the crimp range, contact structure, and housing/pin compatibility.

Related links: JST PH Series Page; JST Connector Series Categories; Agency Part Number Index; Terminal/Housing Selection Guide.

Get a Quote Back to List