JST SH Series Pin Header|BM2B-SH-TF-LF-SN Pin Header
Product Introduction
The JST SH series pin headers are mounted on the board end and mate with SH housings, commonly in 1.0mm pitch structures such as BM2B-SH-TF-LF-SN. The pin headers are small in size, and when selecting them, it is necessary to simultaneously check the number of pins, board-end footprint, soldering method, and the position of the first pin.
Structure and Compatibility
The pin headers consist of a plastic housing and pins. The pins are soldered to the board end, and the plastic housing provides guidance for the mating housing and prevents misalignment. SMT and through-hole structures should be confirmed according to the specific part number; small-size pin headers are more sensitive to mounting accuracy and soldering deviation.
Selection Parameters
The table below lists publicly available structural items. Specific pin counts, plating, packaging, and compatible wire gauges should be based on the part number and drawings.
| Item | Parameter |
|---|---|
| Nominal Pitch | 1.00 mm |
| Component | Board-End Pin Header |
| Common Pin Counts | 2P–16P (according to part number) |
| Mounting | SMT / Through-Hole (according to part number) |
| Compatible Housing | SH Series |
| Soldering | Confirm according to board thickness and process |
Common Part Number Examples
The following part numbers are used for search and inquiry communication and do not represent the full supply range; the actual information should be verified with drawings, BOM, or samples.
| Part Number Example | Description | Compatibility/Pin Count |
|---|---|---|
| BM2B-SH-TF-LF-SN | SH Connector, 2P, SMT / specific structure according to part number | SH Housing |
| BM3B-SH-TF-LF-SN | SH Connector, 3P, SMT / specific structure according to part number | SH Housing |
| BM4B-SH-TF-LF-SN | SH Connector, 4P, SMT / specific structure according to part number | SH Housing |
| Through-Hole / Bent Pins | Confirm according to series part number and drawings | SH Housing |
Application Scenarios
SH connectors are used for high-density board-end connections in small devices, camera modules, and portable equipment.
- Board-end and harness mating for small devices
- Board-end connection for camera/sensor modules
- Board-end pairing with SH housing
Inquiry and Replacement
For inquiries, please provide pin count, mounting type, board thickness, and soldering process; for replacements, first verify connector height, pin pitch, first pin position, and housing latch compatibility.
Related links: JST SH Series Page; JST Series Connector Categories; Agency Part Number Index; Terminal/Housing Selection Guide.