JST EH Series Pin Header|B2B-EH-A Board-End Pin Header
Product Introduction
The JST EH series socket is mounted at the PCB end and mates with the EHR housing. Common part numbers include B2B-EH-A (top entry) and S2B-EH (side entry). The socket has a through-hole structure, suitable for 2.5mm wire-to-board connections in home appliances, industrial control, and power boards.
Structure and Matching
The socket consists of a plastic shell, pins, and a housing cover. The top entry type is suitable for locations with higher board space, while the side entry type is suitable for thin devices; the cover provides mating guidance and prevents mis-insertion, and the pins contact the terminals inside the EHR housing.
Selection Parameters
The table below shows typical structural items and rated values from the JST public catalog. Specific pin counts, plating, packaging, and matching wire gauges should be based on the part number datasheet.
| Item | Parameter/Typical Value |
|---|---|
| Nominal Pitch | 2.5 mm |
| Component | Board-end Socket |
| Common Pin Counts | 2P–15P (according to part number) |
| Mounting | Through-hole, Top Entry/Side Entry |
| Compatible Housing | EHR-2 ... EHR-15 |
| Compatible Terminal | SEH-001T-P0.6 / SEH-002T-P0.6L / SEH-003T-P0.6L |
| Rated Current/Voltage | 3 A (AWG22) / 250 V (public catalog typical value) |
| Packaging | Bagged, confirmed by part number |
Common Part Number Examples
The following part numbers are used for inquiry and quotation communication and do not represent the full supply range; the actual reference should be based on drawings, BOM, or samples.
| Part Number Example | Description | Compatible / Pin Count |
|---|---|---|
| B2B-EH-A | EH top-entry through-hole socket, 2P | EHR housing |
| B3B-EH-A | EH top-entry through-hole socket, 3P | EHR housing |
| B4B-EH-A | EH top-entry through-hole socket, 4P | EHR housing |
| B6B-EH-A | EH top-entry through-hole socket, 6P | EHR housing |
| B10B-EH-A | EH top-entry through-hole socket, 10P | EHR housing |
| S2B-EH | EH side-entry through-hole socket, 2P | EHR housing |
Application Scenarios
EH sockets are used for board-end connections in appliances, industrial control, and power supply boards.
- Board-end interfaces for appliance control boards
- Mainboard connections in industrial control
- Wire-to-board interfaces in power supply boards
Inquiry and Alternatives
For inquiries, please provide the socket part number, pin count, top-entry or side-entry, packaging, and quantity; for alternatives, first check the socket height, pin length, shroud orientation, and housing guidance.
Related links: JST EH Series Page; JST Series Connector Categories; Agency Part Number Index; Terminal/Housing Selection Guide.