JST SCN series 2.0mm connector
Product description
JST SCN series is 2.00 mm pitch connector, suitable for lighting circuit and home appliance control board wiring, bear the connection between the board wire docking. Components include terminals, plastic shell and needle base, the actual material number, digit and outlet direction according to Bom check with the drawing, confirm the correct arrangement after docking. In the wiring structure of lighting and home appliance control board wiring, this series is used to match the connection point of the board end with the wiring harness branch.
Structure and form a complete set
The connector is composed of crimping terminal, rubber shell and pin seat. Each component is selected according to the same series of material number. Before Assembly, it is necessary to check the positioning direction of wire crimping and rubber shell.
- Wire Terminal: crimped on the end of the wire, into the plastic shell after the plate with the end of the needle base positioning
- Rubber Shell: wraps and secures the terminals, providing docking guidance and foolproof construction
- Needle Base: installed at the end of the plate, complete connection with the rubber shell
- Coordination: terminals, plastic shell, needle base according to the same series of material selection
Parameters for type selection
When selecting the type, check the loop usage and space layout, and then check the spacing, component composition and installation type. The number and outlet direction are based on the drawing and Bill of material.
| Project | Explanation |
|---|---|
| Nominal spacing | 2.00mm |
| Components | terminal, plastic shell and needle base |
| Installation type | through hole installation (according to series and material number) |
| Digit and wire gauge | check according to material number and drawing BOM, not according to general specification and so on |
| Series positioning | for lighting and home appliances control board wiring board line docking, priority check with the series material number and direction of the wire |
Application scenarios
This series is responsible for board-line connection and wiring connection in structures such as lighting and home appliance control board wiring. The specific connection position is determined according to the internal layout of the equipment.
- Wiring of lighting circuit
- Wiring for control panel of household appliances
- Branch connection inside the equipment
Part Number Composition and Purchase Verification
This page for JST SCN series 2.0mm connector is used for series-level selection. After confirming the series and pitch, you still need to align each item including the specific part number, pin positions, installation type, and matching components before proceeding to request a quote or validate samples; the series page cannot replace the specific part number page.
| Verification Item | Specification on This Page |
|---|---|
| Series and Pitch | JST SCN series 2.0mm connector, nominal pitch 2.00 mm; the exact part number should follow drawings or BOM |
| Component Composition | Terminal, housing, pin seat (for board-end applications may require additional parts; may include lock pieces depending on part number); select as a complete set from the same series |
| Installation Type | Through-hole or SMD, confirm according to series and part number |
| Pin Positions and Lead-Out Direction | Check according to part number, pin numbering, drawings, and BOM; do not infer based on generic pin positions |
| Crimping and Wire Gauge | Confirm according to terminal specification, conductor structure, and measured crimping range |
| Plating, Color, and Packaging | Confirm according to specific part number; series page does not replace part number page, specification, or sample |
| Substitution Boundary | Different series, different pin configurations, through-hole or surface-mount, with or without locks, that have the same spacing or similar appearance should not be interchanged based solely on appearance; terminals, housings, and sockets should be checked and matched as a complete set according to the same series part number. |
When requesting a quote, it is recommended to provide: target part number or compatible part number, number of pins, wire gauge and conductor structure, plating and color requirements, packaging method, estimated quantity, and delivery date. If any of these items are missing, first verify according to drawings or samples to avoid directly substituting with a similar series.
Inquiry and substitution
Drawings, Bom or samples can be provided for checking material number. Prices are enquired according to material number, quantity and delivery date. The substitute materials should be confirmed item by item according to the series structure, component composition and installation type, and should not be directly mixed across the series.
Related links: JST Series Connectors; JST Series Connectors Sourcing | PH·XH·SM·ZH·GH·VH Terminals & Housings; JST SAN series 2.0 mm connector; JST JC25 series 2.5 mm connector