JST SHLD Series Terminal|SSHL-003GA1-P0.2 Crimp Terminal
Technical Specifications
Part Description SSHL-003GA1-P0.2
Customer Part No. Per drawing / BOM
Drawing No. Per drawing / BOM
Version Component overview
Date —

Dimensions

ItemValue
Pitch1.0 mm
RowsDual row
Wire RangeAWG32–28

Product Introduction

The JST SHLD series terminals are used for cable-end crimping in 1.0mm pitch SHLD dual-row connector systems, with the commonly listed part number in the public catalog being SSHL-003GA1-P0.2. After crimping AWG32–28 wires, the terminals are inserted into the SHLDP housing, and then mated with BM/SM series SHLDS sockets. SHLD is aimed at display devices and small electronic devices, with the terminal contact area gold-plated, suitable for low voltage, low current signal connections.

Structure and Matching

The terminals consist of a crimp area, box-shaped contact area, and anti-deformation structure. The contact area is made of phosphor bronze with nickel underplating and gold plating, while the crimp area covers the conductor and insulation; after being inserted into the housing, it is secured by the housing latch. SHLD terminals only match with SHLDP housings and SHLDS sockets and cannot be used interchangeably with SHD terminals or SH series according to the 1.0mm pitch.

Selection Parameters

The table below provides typical structural items and rated values from the JST public catalog. Specific pin positions, plating, packaging, and compatible wire gauges should refer to the part number specifications.

ItemParameter/Typical Value
Nominal Pitch1.0 mm
Number of RowsDouble Row
ComponentWire Termination Crimp Terminal
Common Part NumberSSHL-003GA1-P0.2
Compatible HousingSHLDP-20V-S(B) ... SHLDP-50V-S-1(B)
Compatible SocketBM20B-SHLDS-G-TFT / SM20B-SHLDS-G-TF
Applicable Wire GaugeAWG32–28
Insulation Outside Diameter0.4–0.8 mm
Rated Current/Voltage1 A / 50 V (AWG28, publicly listed typical value)
Terminal Material/PlatingPhosphor Bronze, Nickel Underplated Gold

Common Part Number Examples

The following part numbers are used for searching and inquiry communication and do not represent the entire supply range; the actual reference should be checked against drawings, BOM, or samples.

Part Number ExampleDescriptionCompatibility / Pin Position
SSHL-003GA1-P0.2SHLD crimp terminal, AWG32–28, gold-platedSHLDP housing / SHLDS socket
SSHL-003GA1-P0.2 ReelReel quantity confirmed according to public catalog and orderAutomatic crimping equipment
Other platings / packagingConfirmed according to drawings or BOMSame series housing

Application Scenarios

SHLD terminals are used for display devices, small electronic devices, and 1.0mm dual-row wire-end connections that require lock retention.

  • Wiring for LCD/PDP display modules
  • Internal connections of small electronic devices
  • Low-voltage signal harnesses

Inquiry and Replacement

For inquiries, please provide the terminal part number, wire gauge, insulation outer diameter, plating, packaging, and quantity; for replacements, first check the crimping range, contact plating, housing latches, and compatibility with SHLDS sockets.

Related links: JST SHLD series page; JST connector series category; Agency part number index; Terminal/Housing selection guide.

Get a Quote Back to List