JST SHL Series 1.0mm Connector
Technical Specifications
Part Description JST SHL series (per drawing / BOM)
Customer Part No. Per drawing / BOM
Drawing No. Per drawing / BOM
Version Series overview
Date —

Dimensions

ItemValue
间距Pitch
1.

Product Introduction

The JST SHL series is an ultra-thin board-to-wire connector with a 1.00mm pitch. The terminals are crimped on the wire end, and the housing mates with the board-end socket, making it suitable for portable devices with thickness limitations, wearable devices, and small sensor modules. The focus of this series is low height and compact layout. During assembly, first check the board-end height, pin positions, and wire exit direction, then ensure the housing correctly locks with the socket.

Structure and Matching

The complete connector set consists of crimp terminals, housing, and board-end socket. After the terminals enter the housing, they are positioned by the housing, while the socket is fixed on the board and provides mating guidance. The low-height structure is more sensitive to terminal crimping height and housing insertion depth, so it is recommended to control crimping and insertion/removal according to the specification.

  • Wire-end terminals: Crimped to the wire end and mate with the board-end socket after being inserted into the housing
  • Housing: Responsible for terminal positioning, foolproofing, and wire exit direction control
  • Socket: Fixed on the board and selectable in straight pin, bent pin, through-hole, or SMT types
  • Matching principle: Terminals, housing, and socket should be matched and checked according to the same series and same pin configuration

Selection Parameters

The table below lists the public structural items of this series. Specific pin counts, mounting types, and compatible wire gauges should be based on the part number and drawings.

ItemParameter
Nominal Pitch1.00 mm
Component CompositionTerminal, Housing, Pin Header
Common Pin Counts2P, 3P, 4P, 5P, 6P, 8P, 10P, 12P, 16P
Mounting TypeStraight Pin / Bent Pin / Through-hole / SMT (according to part number)
Compatible Wire GaugeConfirm according to terminal part number and specification
Matching MethodTerminals, Housing, and Pin Headers of the same series

Common Part Number Examples

The following are common part number examples for easy reference and do not represent the full supply range; actual part numbers, pin counts, plating, and packaging are based on drawings and BOM.

Part Number ExampleComponentPin PositionDescription
SHL-2PPlastic Shell2PCompatible with terminals and pin headers of the same series
SHL-3PPlastic Shell3PCompatible with terminals and pin seats of the same series
SHL-4PPlastic Shell4PCompatible with terminals and pin headers of the same series
SHL-5PPlastic Shell5PCompatible with terminals and pin headers of the same series
SHL-6PPlastic Shell6PCompatible with terminals and pin headers of the same series
SHL-8PPlastic Shell8PCompatible with terminals and pin headers of the same series
SHL-10PPlastic Housing10PCompatible with terminals and pin headers of the same series
SHL-12PPlastic Housing12PCompatible with terminals and pin headers of the same series
SHL-16PPlastic Housing16PCompatible with terminals and pin headers of the same series
Terminal / Pin HeaderCrimp Terminal / Board-End Pin HeaderBy Part NumberCheck According to Drawings, BOM, or Sample

Application Scenarios

The SHL series is mainly used for board-to-board and module interconnections inside ultra-thin devices, with connection positions determined according to structural stacking and board-end layout.

  • ['Board-to-board connections for wearable devices and portable terminals', 'Signal extraction for small sensors and camera modules', 'Internal module interconnections for ultra-thin home appliances and consumer electronics']

Inquiry and Replacement

When inquiring, please provide pin count, board-end mounting type, wire exit direction, and terminal plating requirements; replacement models must first check pitch, height, pin configuration, and housing latch structure. Replacing solely based on pitch is not recommended.

Related links: JST Series Connector Categories; JST Brand Material Column; Agency Material Part Number Index.

Get a Quote Back to List