JST GH Series Terminal|SSHL-002T-P0.2 Crimp Terminal
Product Introduction
The JST GH series terminals are used for crimping wire ends in the 1.25mm pitch GH wire-to-board connection system, with the common part number being SSHL-002T-P0.2. After crimping the wire, the terminal is inserted into the GHR housing, and then mated with BM/SM series board sockets; this series has a safety locking structure, suitable for internal connections in space-limited devices.
Structure and Matching
The terminal consists of a crimping area, a contact spring piece, and an anti-deformation structure. The crimping area covers the conductor and insulation, and once inserted into the housing, it is fixed by the housing latch; the terminal can only be used with GH series housings and sockets, and cannot be cross-used with other series based solely on the 1.25mm pitch.
Selection Parameters
The table below shows typical structure items and rated values from the JST public catalog. Specific pin numbers, plating, packaging, and compatible wire gauge should be confirmed with the part specification sheet.
| Item | Parameter/Typical Value |
|---|---|
| Nominal Pitch | 1.25 mm |
| Component | Wire-end Crimp Terminal |
| Compatible Housing | GHR-02V-S ... GHR-15V-S |
| Compatible Socket | BM02B-GHS-TBT / SM02B-GHS-TB |
| Applicable Wire Gauge | AWG30–26 |
| Insulation Outer Diameter | 0.76–1.0 mm |
| Rated Current/Voltage | 1.0 A / 50 V (Typical Value from Public Catalog) |
| Plating/Packaging | Tin-plated, reel, confirm as per part number |
Common Part Number Examples
The following part numbers are for reference and quote inquiries and do not represent the entire supply range; the actual items should be verified against drawings, BOM, or samples.
| Part Number Example | Description | Compatible/Hole Pitch |
|---|---|---|
| SSHL-002T-P0.2 | GH series crimp terminal, tin-plated, reel | GHR housing / GH pin socket |
| SSHL-002T-P0.2 (LF)(SN) | Common ordering notation with LF/SN mark | GHR housing / GH pin socket |
| Terminals by part number | Other packaging or plating according to drawing/BOM | Same series housing |
Application Scenarios
GH terminals are used for 1.25mm internal wire-to-board connections in monitors, tablets, camera modules, and small electronic devices.
- LCD/PDP internal signal connections
- Interconnection between camera modules and mainboards
- Internal wiring of high-density small devices
Inquiry and Substitution
For inquiries, please provide the terminal part number, wire gauge, insulation outer diameter, plating, packaging, and quantity; for substitutions, first check the crimping range, locking structure, and compatibility between GHR housing and pin socket.
Related links: JST GH Series Page; JST Series Connector Categories; Agency Part Number Index; Terminal / Housing Selection Guide.