JST XHS Series 2.5mm Connector
Product Introduction
The JST XHS series is a 2.50mm pitch board-to-wire connector. It provides terminals, housings, and receptacles for transverse layouts in devices with limited internal space. This series is suitable for signal and low-voltage wiring interconnections between control boards and functional modules. When selecting a model, first check the board-end width, wire outlet direction, and number of pins, then confirm the specific part numbers of the terminals and receptacles.
Structure and Compatibility
Terminals are crimped onto the wire ends and inserted into the housing to mate with the board-end receptacle. The housing provides pin positioning and foolproofing, while the receptacle provides board-end fixation and mating guidance. When used in combination with other series of the same pitch, the part numbers of the terminals, housings, and receptacles must be verified; interchangeability cannot be judged by pitch alone.
- Wire-end terminals: Crimped onto wire ends and inserted into the housing to mate with the board-end receptacle
- Housing: Provides terminal positioning, foolproofing, and wire outlet direction control
- Receptacle: Fixed on the board, selectable in straight pin, bent pin, through-hole, or SMT type
- Compatibility principle: Terminals, housings, and receptacles should be verified for the same series and same pin count
Selection Parameters
The table below lists the publicly available structural items of this series; specific pin counts, mounting types, and compatible wire gauges are subject to the part numbers and drawings.
| Item | Parameter |
|---|---|
| Nominal Pitch | 2.50 mm |
| Component Composition | Terminal, Housing, Pin Header |
| Common Pin Counts | 2P, 3P, 4P, 5P, 6P, 8P, 10P, 12P |
| Mounting Type | Straight Pin / Bent Pin / Through-Hole / SMT (according to part number) |
| Compatible Wire Gauge | Confirm according to terminal part number and datasheet |
| Matching Method | Terminals, Housing, Pin Header from the same series |
Common Part Number Examples
The following are common part number examples for ease of reference and search; they do not represent the full supply range. The actual part number, pin count, plating, and packaging shall be based on drawings and BOM.
| Part Number Example | Component | Pin Count | Description |
|---|---|---|---|
| XHS-2P | Housing | 2P | Compatible with terminals and receptacles of the same series |
| XHS-3P | Housing | 3P | Compatible with terminals and receptacles of the same series |
| XHS-4P | Housing | 4P | Compatible with terminals and receptacles of the same series |
| XHS-5P | Housing | 5P | Compatible with terminals and receptacles of the same series |
| XHS-6P | Housing | 6P | Compatible with terminals and receptacles of the same series |
| XHS-8P | Housing | 8P | Compatible with terminals and receptacles of the same series |
| XHS-10P | Housing | 10P | Compatible with terminals and receptacles of the same series |
| XHS-12P | Housing | 12P | Compatible with terminals and receptacles of the same series |
| Terminals / Receptacles | Crimp Terminals / Board Receptacles | According to Part Number | Check according to drawings, BOM, or sample |
Application Scenarios
The XHS series is suitable for lateral board-to-board connections between control boards, function boards, and internal device modules.
- ['Interconnection between home appliance control boards and display boards', 'Internal signal and low-voltage wiring in small devices', 'Lateral cable layout with limited board-end space']
Inquiry and Replacement
For inquiries, please provide the number of pins, board-end mounting type, and wire exit direction; for replacements, first verify the terminal part number, housing keying, and header height to avoid replacing based only on a 2.5mm pitch.
Related links: JST Series Connector Classification; JST Brand Material Section; Agency Material Part Number Index.