JST PHD Series Terminals|SPHD-001T-P0.5 Crimp Terminal
Technical Specifications
Part Description SPHD-001T-P0.5 / SPHD-002T-P0.5
Customer Part No. Per drawing / BOM
Drawing No. Per drawing / BOM
Version Component overview
Date —

Dimensions

ItemValue
Pitch2.0 mm
RowsDual row
Wire RangeAWG26–22 / AWG28–24

Product Introduction

The JST PHD series terminals are used for crimping wire ends in the 2.0mm pitch PHD dual-row wire-to-board connection system. Common part numbers include SPHD-001T-P0.5 and SPHD-002T-P0.5. After crimping, the terminals are inserted into the PHDR dual-row housing, then mated with board-end pin headers such as B08B-PHDSS. The PHD system features a dual-row, low-profile, fully shrouded design, suitable for high-density board-end layouts.

Structure and Matching

The terminals consist of a crimping section, box-type contact springs, and an anti-deformation structure. PHD uses a dual-row arrangement, with terminals positioned and locked in the housing in upper and lower rows. The terminals, housing, and pin headers must all be from the PHD series and cannot be mixed with single-row series such as PA with a 2.0mm pitch.

Selection Parameters

The table below shows typical structural items and rated values from JST's public catalog. The specific number of pins, plating, packaging, and suitable wire gauges are determined by the part number specification sheet.

ItemParameter/Typical Value
Nominal Pitch2.0 mm
Number of RowsDouble Row
ComponentWire Crimp Terminal
Compatible HousingPHDR-08VS ... PHDR-34VS (Even Number of Pins)
Compatible HeaderB08B-PHDSS / S08B-PHDSS
Applicable Wire GaugeSPHD-001T-P0.5: AWG26–22
Applicable Wire GaugeSPHD-002T-P0.5: AWG28–24
Rated Current/Voltage3 A / 250 V (Typical Public Catalog Value)

Common Part Number Examples

The following part numbers are used for search and inquiry communication and do not represent the full supply range; the actual reference should be checked against drawings, BOM, or samples.

Part Number ExampleDescriptionCompatible Housing/Pin
SPHD-001T-P0.5PHD crimp terminal, AWG26–22, tin-platedPHDR housing / PHDSS socket
SPHD-002T-P0.5PHD crimp terminal, AWG28–24, tin-platedPHDR housing / PHDSS socket
Terminals by part numberOther plating or packaging according to drawings/BOMSame series dual-row housing

Application Scenarios

PHD terminals are used for 2.0mm wire-to-board connections in high-density board ends, dual-row multi-circuit layouts, and low-profile devices.

  • Dual-row multi-circuit wiring
  • High-density motherboard interfaces
  • Internal connections for low-profile devices

Inquiry and Replacement

For inquiries, please provide the terminal part number, wire gauge, insulation outer diameter, plating, packaging, and quantity; when replacing, first check the crimp range, dual-row arrangement, foolproof structure, and compatibility with PHDR housing/PHDSS socket.

Related links: JST PHD series page; JST connector categories; Distributor part number index; Terminal/Housing Selection Guide.

Get a Quote Back to List