JST PH Series Connector Housings|PH-2P to PH-16P Housings
Technical Specifications
Part Description PH-2P ... PH-16P / PHB-2P ...
Customer Part No. Per drawing / BOM
Drawing No. Per drawing / BOM
Version Component overview
Date —

Dimensions

ItemValue
Pitch2.00 mm
ComponentHousing

Product Introduction

The JST PH series housings are used to fix PH crimp terminals and provide pin positioning and error-proofing. Common models include PH-2P to PH-16P and PHB with latch structure. The housings are used together with terminals and pin headers of the same series. During assembly, first confirm the position of the first pin, the wire exit direction, and the latch direction.

Structure and Compatibility

The inside of the housing has terminal positioning grooves and error-proof structures, while the outside provides plug-in guidance. The PHB latch structure adds locking, suitable for positions with pulling or vibration. Housing material, color, and flame-retardant requirements should be confirmed according to the specifications or drawings.

Selection Parameters

The table below shows the publicly available structural items. Specific pin configurations, plating, packaging, and compatible wire gauges should be based on the part number and drawings.

ItemParameter
Nominal Pitch2.00 mm
ComponentHousing / Shell
Common Pin Counts2P–16P (according to part number)
StructurePH Standard / PHB Latch
Compatible TerminalsSPH-002T Series
Compatible Pin HeadersPH Series Board End Pin Headers

Common Part Number Examples

The following part numbers are for searching and quotation communication and do not represent the full supply range; the actual items should be confirmed with drawings, BOM, or samples.

Part Number ExampleDescriptionCompatibility / Pin Count
PH-2PPH standard housing, 2PPH terminal / PH socket
PH-4PPH standard housing, 4PPH terminal / PH socket
PH-6PPH standard housing, 6PPH terminal / PH socket
PH-8PPH standard housing, 8PPH terminal / PH socket
PHB-2PPHB housing with latch, 2PPH terminal / PH socket
PHB-4PPHB housing with latch, 4PPH terminal / PH socket

Application Scenarios

PH housings are used for 2.0mm wire-end connections in small appliances, consumer electronics, and internal device wiring.

  • Board-to-wire connections requiring pin orientation protection
  • Wire harness positions with latch to prevent detachment
  • Complete assembly of PH terminals and sockets

Inquiry and Substitution

For inquiries, please provide pin count, standard/latch structure, color, and packaging; when substituting, first check pin sequence, latch direction, and socket height.

Related links: JST PH Series Page; JST Series Connector Categories; Agency Part Number Index; Terminal/Housing Selection Guide.

Get a Quote Back to List