Project Background

Electronic Whiteboards and smart teaching Integrated terminals are widely used in education and meeting scenarios; the product integrates HD display, infrared/capacitive touch and writing interaction, pursuing a narrow bezel and slim body. The main board, power board, touch board and display module are compactly laid out in the rear cover, leaving limited space for the harness, so harness design must proceed in sync with the unit structure.

The customer is a commercial display equipment manufacturer whose Electronic Whiteboard products cover multiple sizes with similar internal structures, but panel and board positions vary with size, requiring a harness solution that can be rapidly derived by panel specification.

Customer Requirements

The customer requires the harness to reliably connect display, touch, power and peripheral interfaces within the limited rear-cover space, with neat routing that does not affect the slim appearance; across sizes the harness should be as universal as possible for easy production organization.

Solution and Design/Process Highlights

The engineering team integrated the internal connection harness per the rear-cover layout: the display module branch uses FFC/FPC flat cable close to the panel; power and signal branches are bundled separately to reduce interference; each board interface is matched with foolproof connectors. Wire lengths and branches are derived by whiteboard size, with fixing points along the housing edge for easy line-side insertion.

During the sample stage the team supported the customer's trial assembly, confirming spatial fit of the harness with the panel and main board before freezing drawings; cutting, crimping and assembly follow work instructions, and terminal crimping is first-article confirmed and brought into routine inspection.

Product Scope and Testing

Products cover the display module flat cable, internal connection harness, touch signal lines, etc. All products undergo wire-by-wire continuity testing before shipment, with sampling insulation checks on power circuits and sampling checks of signal quality on display circuits, verifying wire sequence and polarity wire by wire.

Project Results

The harness was stably delivered in batches per unit drawings, with neat routing and smooth insertion, supporting the customer's whole-unit wiring across multiple sizes. The customer reported good matching between the harness and unit structure, with stable line-side assembly efficiency.

FAQ

Q: Why do Electronic Whiteboard display signals commonly use FFC/FPC flat cable?

A: The space close to the panel inside the rear cover is narrow; FFC/FPC flat cable is thin and easy to route along the edge, suiting short-distance display signal connection.

Q: How is the harness handled across different whiteboard sizes?

A: Based on a universal branch structure, wire and flat-cable lengths are derived per panel and board positions, keeping connectors and wire sequence consistent for easy production.

Q: How is a new project arranged, from contact to sampling?

A: After the customer provides the unit structure or harness drawings, the engineering team evaluates the solution and process route; samples and verification milestones proceed per the project plan and customer confirmation.

Contact Us

To learn about Electronic Whiteboard harnesses, internal harnesses for commercial display equipment or other customized harness solutions, please provide drawings or whole-unit structure information; the engineering team will reply with the solution and sampling schedule after evaluation. Email sz136138@szfandouai.cn, Tel 18929363263 (WhatsApp +86 18929363263). We are located at Unit 2, 7th Floor, Building E1-1, Qunyi Intelligent Manufacturing Industrial Park, No. 3 Xingyuan South Road, Zhongkai High-tech Zone, Huizhou City, Guangdong Province, China.

Get a Quote Back to List