Connector Selection and Application
Connectors are the critical interface between a harness and the equipment, and their selection directly affects the reliability of the whole electrical system. Connector selection requires balancing electrical, mechanical and environmental factors.
Electrical Parameters
These include rated voltage, rated current, contact resistance and insulation resistance. Always leave adequate margin: rated current is generally chosen at 1.5 to 2 times the actual working current to ensure long-term stable operation and headroom for temperature rise.
Mechanical Parameters
These include mating cycles, mating method, mounting method and fixing method. Insertion-life requirements vary by application: consumer products generally require over 500 cycles, while industrial products need over 1000 cycles, with attention to mating force and lock reliability.
Environmental Parameters
These include operating temperature range, waterproof rating, vibration resistance and chemical resistance. Connectors used in automotive engine compartments must cover -40 to 125 degrees C and reach at least IP67.
Common Connector Brands
Common automotive brands include TE, Molex, JAE, Yazaki and Sumitomo; industrial brands include Phoenix Contact, Weidmuller and Harting; consumer brands include JST, Hirose and JAE. Brand choice should balance product positioning and cost budget.