Key Points for Display and Touch Harness Layout on Electronic Whiteboards
Electronic Whiteboards pursue a narrow bezel and slim body; panel, main board, power board and touch board are compactly laid out in the rear cover. Harness design must track the unit structure, aligning wire exits, branch points and fixing methods at the drawing stage.
1. Routing by Spatial Layout
1. The display flat cable is laid tight to the panel edge, using FFC/FPC thinness to pass through narrow gaps.
2. The internal connection harness runs along the housing edge and structural seams, with fixing points fitted to the rear-cover space.
3. Power and signal branches are bundled separately to reduce mutual interference.
2. Derivation by Size Specification
Multi-size whiteboards share a similar structure; the harness is based on a universal branch and derives wire and flat-cable lengths per panel and board positions, keeping connectors and wire sequence consistent for easy production.
3. Assembly and Maintenance
Board-end connectors use a foolproof design, and the bay end allows easy removal; wires are color-coded by function so loops can be quickly identified during servicing.
4. Process and Testing
Cutting and crimping follow work instructions; terminal crimping is first-article confirmed and brought into routine inspection; finished products undergo wire-by-wire continuity, with sampling insulation checks on power circuits and sampling of display signal circuits.
This article is written by the engineering team of a professional wire harness manufacturer; for Electronic Whiteboard or commercial display harness process needs, please contact us for technical support.