Shuntai black ribbon cable
Technical Specifications
Part Description Shuntai BLACK-RIBBON (per spec sheet)
Customer Part No. Per drawing / BOM
Drawing No. Per part number
Version Series overview
Date —

Dimensions

ItemValue
Series / StyleBLACK-RIBBON
InsulationPVC
ConstructionRibbon cable
ShieldingUnshielded
JacketNone (parallel ribbon)
PitchPer spec sheet
Core count / pitchCore count and pitch per spec sheet
ColorsPer order

Product Introduction

This ribbon cable has a black parallel multi-core structure with PVC insulation, a uniform appearance, and is convenient for overall device color coordination. This part number belongs to the Shuntai ribbon cable series and is used for internal device wiring, panel connection cables, and complete harness processing. The number of cores and spacing should be confirmed according to the drawings. The page structure items are only for selection reference; parameters are subject to the specification sheet and samples.

Structure and Specifications

The ribbon cable consists of multiple black insulated conductors arranged side by side. The spacing, number of cores, and width are determined according to the specification sheet. The ends can be separated for crimp terminals or used with connectors. The table below lists confirmable structural items.

  • Insulation Material: PVC
  • Structure Type: Black Parallel Ribbon Cable
  • Ribbon Cable Pitch: Confirm according to specification sheet and drawings
  • Number of Cores: Confirm according to drawings
  • Shielding: Unshielded
  • Color: Black (confirmed by order)
  • End Treatment: Confirm according to accessories

Selection Parameters

When selecting, please provide the corresponding connector or terminal, board spacing, and number of cores. Verify the number of cores, pitch, ribbon width, length, and end processing method. The black ribbon cable matches the overall device color, and wire sequence should be distinguished by wire number labels or end markings.

ProjectExplanation
Number of CoresSelected according to circuit
Pitch and WidthConfirm according to specification sheet
LengthCut according to drawings
EndsBranch crimping or connector combination executed according to drawings

Application Scenarios

This ribbon cable is used for internal device wiring, panel outlet wiring, and complete harness processing. It performs multi-core parallel connections within devices that require a unified appearance. The parallel structure facilitates bundling and securing.

  • Internal multi-core wiring for equipment
  • Panel connection harnesses
  • Complete plug-in ribbon cables
  • Parallel connection wires inside devices

Part Number Composition and Purchase Verification

This page of Shuntai black ribbon cable is used for series-level selection. After confirming the UL style and wire structure, the specific part number, wire gauge, conductor structure, insulation or jacket, and termination processing must be aligned item by item before proceeding to inquiry or sample verification; the series page cannot replace the specific part number page.

Verification ItemThis Page Standard
Series and StructureShuntai black ribbon cable; UL style, conductor structure, and wire structure are confirmed according to the part number
Component CompositionConductor, insulation, and if necessary, including jacket, shielding, or cable structure; verify according to the same part number and structure
Processing and TerminationCutting, stripping, crimping, soldering, heat shrink tubing, or terminal attachment confirmed according to drawings
Number of Cores and Wire Exit DirectionVerify according to part number, number of cores, color, pitch, and termination method, not based on general specifications
Conductor and Wire GaugeAWG, number of conductor strands, single strand diameter, and conductor resistance confirmed according to the specification and actual measurement
Insulation, Jacket, and PackagingMaterial, temperature rating, color, markings, length, and packaging confirmed according to the specific part number
Substitution BoundaryDifferent UL styles, wire gauges, conductor structures, insulation materials, and temperature ratings cannot be substituted based solely on outer diameter; ribbon cables also need to be checked for pitch, number of cores, color, and termination method.

When requesting a quote, it is recommended to provide: UL style, AWG, conductor structure, number of cores and pitch, insulation or jacket material, temperature rating, color and markings, cut length, termination method, estimated quantity, and delivery time. If any of these items are missing, verify according to the drawings or samples first to avoid substitution based solely on outer diameter.

Inquiry and Alternatives

Prices are quoted based on the part number, number of cores, quantity, and delivery time; for substitute ribbon cables, it is necessary to compare the pitch, number of cores, color, and end type. It is recommended to provide drawings or samples. Sample parts should have their wire sequence and appearance checked before arranging mass production; discounts and payment methods are executed according to the contract.

Related sections and similar materials: Shuntai Wire and Ribbon Cable Classification; Shuntai Wire Agency Column; Shuntai Gray Ribbon Cable; Shuntai Red and White Ribbon Cable.

Get a Quote Back to List