Shuntai red and white flat cable
Technical Specifications
Part Description Shuntai RED-WHITE-RIBBON (per spec sheet)
Customer Part No. Per drawing / BOM
Drawing No. Per part number
Version Series overview
Date —

Dimensions

ItemValue
Series / StyleRED-WHITE-RIBBON
InsulationPVC
ConstructionRibbon cable
ShieldingUnshielded
JacketNone (parallel ribbon)
PitchPer spec sheet
Core count / pitchCore count and pitch per spec sheet
ColorsPer order

Product Introduction

This ribbon cable uses a parallel multi-core structure with alternating red and white colors and PVC insulation. The alternating colors make it easier to identify wire sequences and separate wires. This part number belongs to the Shuntai ribbon cable series, commonly used for terminal connection wires, internal device harnesses, and ribbon cable processing. The number of cores and spacing should be confirmed according to the drawings. The color arrangement is for structural illustration only and should be based on the specifications.

Structure and Specifications

The conduction wires of the ribbon cable are arranged side by side in alternating red and white. The spacing and number of cores are determined according to the specifications, and the ends can be split for crimping terminals or paired with connectors. The following items can be preliminarily checked, while the wire sequence arrangement is executed according to the drawings.

  • Insulation material: PVC
  • Structure type: Red and white alternating ribbon cable
  • Ribbon cable spacing: Confirmed according to specifications and drawings
  • Number of cores: Confirmed according to drawings
  • Shielding: Non-shielded
  • Color arrangement: Red and white alternating (confirmed per order)
  • End treatment: Confirmed according to accessories

Selection Parameters

When selecting, please provide the matching terminals or connectors, number of cores, and assembly positions. Verify the number of cores, spacing, width, length, alternating color direction, and end processing. Red and white ribbon cables are used in harnesses with high wire sequence identification requirements, and the correspondence of the first and last wires must be confirmed.

ProjectExplanation
Number of coresSelected according to circuit list
Spacing and widthConfirmed according to specifications
LengthCut according to drawings
EndsTerminal crimping or wire splitting according to drawings

Application Scenarios

This ribbon cable is used for plug-out wiring, internal device harnesses, and ribbon cable sections that require rapid sequence identification. It helps verify wire sequences during assembly and maintenance in multi-core parallel connection scenarios.

  • Terminal connection harnesses
  • Internal multi-core ribbon cables within devices
  • Connection wires requiring high wire sequence identification
  • Complete plug-in ribbon cable sets

Part Number Composition and Purchase Verification

This page of Shuntai red and white flat cable is used for series-level selection. After confirming the UL style and wire structure, the specific part number, wire gauge, conductor structure, insulation or jacket, and termination processing must be aligned item by item before proceeding to inquiry or sample verification; the series page cannot replace the specific part number page.

Verification ItemThis Page Standard
Series and StructureShuntai red and white flat cable; UL style, conductor structure, and wire structure are confirmed according to the part number
Component CompositionConductor, insulation, and if necessary, including jacket, shielding, or cable structure; verify according to the same part number and structure
Processing and TerminationCutting, stripping, crimping, soldering, heat shrink tubing, or terminal attachment confirmed according to drawings
Number of Cores and Wire Exit DirectionVerify according to part number, number of cores, color, pitch, and termination method, not based on general specifications
Conductor and Wire GaugeAWG, number of conductor strands, single strand diameter, and conductor resistance confirmed according to the specification and actual measurement
Insulation, Jacket, and PackagingMaterial, temperature rating, color, markings, length, and packaging confirmed according to the specific part number
Substitution BoundaryDifferent UL styles, wire gauges, conductor structures, insulation materials, and temperature ratings cannot be substituted based solely on outer diameter; ribbon cables also need to be checked for pitch, number of cores, color, and termination method.

When requesting a quote, it is recommended to provide: UL style, AWG, conductor structure, number of cores and pitch, insulation or jacket material, temperature rating, color and markings, cut length, termination method, estimated quantity, and delivery time. If any of these items are missing, verify according to the drawings or samples first to avoid substitution based solely on outer diameter.

Inquiry and Alternatives

Quotations are calculated based on part number, number of cores, quantity, and delivery time; for substitute models, it is necessary to compare the two-color arrangement, spacing, number of cores, and end form. It is recommended to provide drawings or samples. Sample verification should check the wire sequence and connections before bulk supply; business terms are subject to the contract.

Related categories and similar materials: Shuntai Wire and Ribbon Cable Classification; Shuntai Wire Agency Column; Shuntai Gray Ribbon Cable; Shuntai Black Ribbon Cable.

Get a Quote Back to List