Shuntai Terminal Wire
Product Introduction
This product is a terminal connection wire processed according to drawings. Both ends of the wire, or a single end, can be crimped with the corresponding terminals. Different wire and terminal types can be combined according to the drawings. This part number belongs to the Shuntai connection wire series, used for internal device connections, board-end to component-end transitions. Wire specifications and terminal models should be confirmed according to the BOM. This page does not specify the details of the conductor and terminals; please refer to the drawings and samples.
Structure and Specifications
This product consists of wires, crimp terminals, and necessary plastic housings or sleeves. The terminals and wires are crimped according to the circuit; the structure can be either single-end or double-end terminals. The following items can be preliminarily checked, with wire and terminal details confirmed according to the drawings.
- Product type: Terminal connection wire
- Wire insulation: Selected according to specification and drawings
- Terminals: Selected according to drawing part numbers
- Connection method: Single-end or double-end crimping (as per drawing)
- Number of cores: Confirmed according to drawings
- Color: Confirmed according to order
- Length: Processed according to drawing dimensions
Selection Parameters
When selecting, please provide complete drawings or BOM to check wire gauge, terminal model, crimping direction, wire exit length, branching positions, and color markings. Both-end connectors or plastic housings need to match the corresponding pin locations. If necessary, produce samples first to confirm connection and continuity.
| Project | Explanation |
|---|---|
| Wire and terminal | Selected according to drawing part numbers |
| Length and branching | Processed according to drawings |
| Terminal ends | Crimping direction and sleeve to be confirmed according to drawings |
| Color and wire number | Corresponding to the complete machine identification system |
Application Scenarios
These terminal wires are used for internal device board-end to component-end transitions, power and signal circuit connections, and branch leads in complete harnesses, taking charge of connections where either dual-end plugs or single-end wires are required. Wire and terminal combinations can be customized according to device structure.
- Internal device terminal connection wires
- Board-end to component-end transition leads
- Power/signal branch terminal wires
- Branch segments in complete harnesses
Part Number Composition and Purchase Verification
This page of Shuntai Terminal Wire is used for series-level selection. After confirming the UL style and wire structure, the specific part number, wire gauge, conductor structure, insulation or jacket, and termination processing must be aligned item by item before proceeding to inquiry or sample verification; the series page cannot replace the specific part number page.
| Verification Item | This Page Standard |
|---|---|
| Series and Structure | Shuntai Terminal Wire; UL style, conductor structure, and wire structure are confirmed according to the part number |
| Component Composition | Conductor, insulation, and if necessary, including jacket, shielding, or cable structure; verify according to the same part number and structure |
| Processing and Termination | Cutting, stripping, crimping, soldering, heat shrink tubing, or terminal attachment confirmed according to drawings |
| Number of Cores and Wire Exit Direction | Verify according to part number, number of cores, color, pitch, and termination method, not based on general specifications |
| Conductor and Wire Gauge | AWG, number of conductor strands, single strand diameter, and conductor resistance confirmed according to the specification and actual measurement |
| Insulation, Jacket, and Packaging | Material, temperature rating, color, markings, length, and packaging confirmed according to the specific part number |
| Substitution Boundary | Different UL styles, wire gauges, conductor structures, insulation materials, and temperature ratings cannot be substituted based solely on outer diameter; ribbon cables also need to be checked for pitch, number of cores, color, and termination method. |
When requesting a quote, it is recommended to provide: UL style, AWG, conductor structure, number of cores and pitch, insulation or jacket material, temperature rating, color and markings, cut length, termination method, estimated quantity, and delivery time. If any of these items are missing, verify according to the drawings or samples first to avoid substitution based solely on outer diameter.
Inquiry and Alternatives
Quotations are calculated based on wire specifications, terminal part numbers, quantity, and delivery time; substitute terminals or wires need to be checked against drawings and fittings for confirmation, and it is recommended to provide samples or drawings. After sample crimping and conductivity are confirmed, mass production can be arranged; discounts, payment methods, and other business terms are executed according to the contract.
Related sections and similar materials: Shuntai Wire and Ribbon Cable Categories; Shuntai Wire Agency Column; Shuntai U-Cut Ribbon Cable; Shuntai 3.96 Pitch IDC Ribbon Cable.