Shuntai U-shaped flat cable
Technical Specifications
Part Description Shuntai U-CUT-RIBBON (per spec sheet)
Customer Part No. Per drawing / BOM
Drawing No. Per part number
Version Series overview
Date —

Dimensions

ItemValue
Series / StyleU-CUT-RIBBON
InsulationPVC
ConstructionRibbon cable (U-cut)
ShieldingUnshielded
JacketNone (parallel ribbon)
PitchPer spec sheet
Core count / pitchCore count and pitch per spec sheet
ColorsPer order

Product Introduction

This ribbon cable is a parallel multi-core ribbon cable, with the ends separated by U-shaped notches, making it easier to separate individual cores before inserting or crimping terminals. This part number belongs to the Shuntai Ribbon Cable series and is used for complete terminal wire processing and internal equipment wiring. The number of cores, notch positions, and length are confirmed according to the drawings. The structural form is only for selection reference; details are subject to the specification sheet.

Structure and Specifications

The main body of the ribbon cable is a side-by-side multi-core structure, with U-shaped notches at the ends as needed. After separating each core, terminals can be crimped individually. The following items can be checked in advance; notch dimensions and separated wire lengths are determined according to the drawings.

  • Insulation material: PVC
  • Structural type: U-cut separated wire ribbon cable
  • Ribbon spacing: Confirm according to the specification sheet and drawings
  • Number of cores: Confirm according to the drawings
  • Notch type: U-shaped separation notch
  • Shielding: Unshielded
  • End treatment: Crimp terminals after separation according to the drawings

Selection Parameters

When selecting, please provide the terminal scheme, separated wire length, and assembly position, and confirm the number of cores, spacing, width, ribbon length, U-cut position, and the end treatment of each core. The bending and forming method of each core after separation should be indicated in the drawings.

ProjectExplanation
Number of coresSelect according to the circuit
Spacing and widthConfirm according to the specification sheet
Ribbon length and notch positionProcess according to the drawings
EndCrimp terminals after separation according to the drawings

Application Scenarios

This ribbon cable is used for complete terminal wires, internal multi-core wiring inside equipment, and wiring harnesses that require individual core separation at the ends, facilitating wire separation organization before terminal crimping and insertion. The U-cut structure helps control separated wire length and arrangement.

  • Complete terminal ribbon cables
  • Internal multi-core connection wires in equipment
  • Wiring harnesses with individually separated cores at the ends
  • Interconnections between panels and devices

Part Number Composition and Purchase Verification

This page of Shuntai U-shaped flat cable is used for series-level selection. After confirming the UL style and wire structure, the specific part number, wire gauge, conductor structure, insulation or jacket, and termination processing must be aligned item by item before proceeding to inquiry or sample verification; the series page cannot replace the specific part number page.

Verification ItemThis Page Standard
Series and StructureShuntai U-shaped flat cable; UL style, conductor structure, and wire structure are confirmed according to the part number
Component CompositionConductor, insulation, and if necessary, including jacket, shielding, or cable structure; verify according to the same part number and structure
Processing and TerminationCutting, stripping, crimping, soldering, heat shrink tubing, or terminal attachment confirmed according to drawings
Number of Cores and Wire Exit DirectionVerify according to part number, number of cores, color, pitch, and termination method, not based on general specifications
Conductor and Wire GaugeAWG, number of conductor strands, single strand diameter, and conductor resistance confirmed according to the specification and actual measurement
Insulation, Jacket, and PackagingMaterial, temperature rating, color, markings, length, and packaging confirmed according to the specific part number
Substitution BoundaryDifferent UL styles, wire gauges, conductor structures, insulation materials, and temperature ratings cannot be substituted based solely on outer diameter; ribbon cables also need to be checked for pitch, number of cores, color, and termination method.

When requesting a quote, it is recommended to provide: UL style, AWG, conductor structure, number of cores and pitch, insulation or jacket material, temperature rating, color and markings, cut length, termination method, estimated quantity, and delivery time. If any of these items are missing, verify according to the drawings or samples first to avoid substitution based solely on outer diameter.

Inquiry and Alternatives

Prices are quoted based on part number, number of cores, quantity, and delivery time; for alternative ribbon cables, it is necessary to compare the pitch, number of cores, notch type, and terminal scheme. It is recommended to provide drawings or samples. Sample parts should be checked for wire dimensions and wire sequence before mass supply; business matters are handled according to the contract.

Related sections and similar materials: Shuntai Wire and Ribbon Cable Categories; Shuntai Wire Agency Section; Shuntai 3.96mm Pitch IDC Ribbon Cable; Shuntai Terminal Wires.

Get a Quote Back to List