Shuntai FEP Teflon Multi-Core Ribbon Cable
Technical Specifications
Part Description Shuntai FEP-RIBBON (per spec sheet)
Customer Part No. Per drawing / BOM
Drawing No. Per part number
Version Series overview
Date —

Dimensions

ItemValue
Series / StyleFEP-RIBBON
InsulationFEP (PTFE)
ConstructionRibbon cable
ShieldingUnshielded
JacketNone (parallel ribbon)
PitchPer spec sheet
Core count / pitchCore count and pitch per spec sheet
ColorsPer order

Product Introduction

This ribbon cable is composed of multiple FEP insulated cores arranged in parallel to form a ribbon structure. The wire sequence is clear, making it easy to separate and connect. This part number belongs to the Shuntai ribbon cable series, used for dense board-to-board connections, internal device ribbon cable and jumper processing. The number of cores and pitch should be confirmed according to the drawings. FEP in the name indicates the insulation material, and the part number and structure are based on the specification sheet.

Structure and Specifications

Each core of the ribbon cable is aligned in the same direction and placed side by side. The core pitch and number of cores should be determined according to the specification sheet. The ends can be separated or crimped to connectors as needed. The table below lists verifiable structural items; details not listed should be verified according to the specification sheet.

  • Insulation material: FEP Teflon
  • Structure type: Multi-core colored ribbon cable
  • Ribbon pitch: Confirm according to specification sheet and drawings
  • Number of cores: Confirm according to drawings
  • Shielding: Non-shielded
  • Color: Confirm according to order
  • Printing: According to specification sheet and order requirements

Selection Parameters

When selecting, please provide the connector adaptation type, board-to-board spacing, and number of cores, and verify the number of cores, pitch, ribbon width, cut length, and end processing. When colored ribbon cable is used with IDC or terminals, the wire sequence must correspond to the connector pin positions one by one.

ProjectExplanation
Number of coresSelected according to circuit list
Pitch and widthConfirm according to specification sheet
LengthCut according to drawings
EndsSeparate, crimp, or pierce according to drawing processing

Application Scenarios

This colored ribbon cable is used for dense inter-board connections inside devices, mainboard-to-subboard ribbon cables, and jumper connections, especially where there are many cores and a neat arrangement is required; the parallel structure makes it easy to identify wire sequence and connect in rows.

  • Dense board-to-board ribbon cable connections
  • Internal multi-core jumper cables
  • Mainboard to subboard connection wires
  • Set wiring harnesses for row insertion

Part Number Composition and Purchase Verification

This page of Shuntai FEP Teflon Multi-Core Ribbon Cable is used for series-level selection. After confirming the UL style and wire structure, the specific part number, wire gauge, conductor structure, insulation or jacket, and termination processing must be aligned item by item before proceeding to inquiry or sample verification; the series page cannot replace the specific part number page.

Verification ItemThis Page Standard
Series and StructureShuntai FEP Teflon Multi-Core Ribbon Cable; UL style, conductor structure, and wire structure are confirmed according to the part number
Component CompositionConductor, insulation, and if necessary, including jacket, shielding, or cable structure; verify according to the same part number and structure
Processing and TerminationCutting, stripping, crimping, soldering, heat shrink tubing, or terminal attachment confirmed according to drawings
Number of Cores and Wire Exit DirectionVerify according to part number, number of cores, color, pitch, and termination method, not based on general specifications
Conductor and Wire GaugeAWG, number of conductor strands, single strand diameter, and conductor resistance confirmed according to the specification and actual measurement
Insulation, Jacket, and PackagingMaterial, temperature rating, color, markings, length, and packaging confirmed according to the specific part number
Substitution BoundaryDifferent UL styles, wire gauges, conductor structures, insulation materials, and temperature ratings cannot be substituted based solely on outer diameter; ribbon cables also need to be checked for pitch, number of cores, color, and termination method.

When requesting a quote, it is recommended to provide: UL style, AWG, conductor structure, number of cores and pitch, insulation or jacket material, temperature rating, color and markings, cut length, termination method, estimated quantity, and delivery time. If any of these items are missing, verify according to the drawings or samples first to avoid substitution based solely on outer diameter.

Inquiry and Replacement

Prices are quoted based on part number, number of cores, quantity, and delivery date; substitute ribbon cables must be compared in terms of insulation, spacing, number of cores, and end types. Providing drawings or samples is recommended. Sample parts should be checked for wire sequence and connections before bulk supply; discounts and payment terms are executed according to the contract.

Related categories and similar materials: Shuntai Wire and Ribbon Cable Classification; Shuntai Wire Agency Column; Shuntai PVC Ribbon Cable; Shuntai UL1330 Teflon High-Temperature Wire.

Get a Quote Back to List