Shuntai PVC Ribbon Cable
Technical Specifications
Part Description Shuntai PVC-RIBBON (per spec sheet)
Customer Part No. Per drawing / BOM
Drawing No. Per part number
Version Series overview
Date —

Dimensions

ItemValue
Series / StylePVC-RIBBON
InsulationPVC
ConstructionRibbon cable
ShieldingUnshielded
JacketNone (parallel ribbon)
PitchPer spec sheet
Core count / pitchCore count and pitch per spec sheet
ColorsPer order

Product Introduction

This ribbon cable has a multi-core parallel side-by-side structure, with PVC as the insulating material. The sequence of each core wire is neat, making it easy to separate and connect. This part number belongs to the Shuntai ribbon cable series, used for peripheral devices, internal instrument wiring, and board-to-board connections. The number of cores and spacing should be confirmed according to the drawings. The structural items listed on the page are for selection reference only, with the specifications and samples taking precedence.

Structure and Specifications

The ribbon cable is made by aligning multiple PVC-insulated core wires side by side, with spacing and number of cores confirmed according to specifications and drawings. The ends can be separated and crimped with terminals or used with piercing connectors. The following items can be checked in advance.

  • Insulating material: PVC
  • Structure type: Parallel ribbon cable
  • Ribbon cable pitch: Confirm according to specifications and drawings
  • Number of cores: Confirm according to drawings
  • Shielding: Unshielded
  • Color: Confirm according to order
  • End processing: Confirm according to compatible connectors

Selection Parameters

When selecting, please provide the connector model or drawings, board spacing, and number of cores to verify the number of cores, spacing, ribbon width, length, and end processing method. When used with piercing connectors, confirm the pin pitch and wire sequence correspondence.

ProjectExplanation
Number of coresSelected according to the circuit list
Pitch and widthConfirm according to specifications
LengthCut according to drawings
EndsSeparate, crimped, or pierced according to the drawings

Application Scenarios

This ribbon cable is used for internal connections of computer peripherals, internal instrument wiring, and board-to-board connections, in areas where multiple signal cores need to be organized neatly; the parallel structure facilitates wire sequence management and batch assembly.

  • Internal wiring connections of peripherals
  • Internal wiring of instruments and devices
  • Board-to-board connection cables
  • Complete jumper and connector wire harnesses

Part Number Composition and Purchase Verification

This page of Shuntai PVC Ribbon Cable is used for series-level selection. After confirming the UL style and wire structure, the specific part number, wire gauge, conductor structure, insulation or jacket, and termination processing must be aligned item by item before proceeding to inquiry or sample verification; the series page cannot replace the specific part number page.

Verification ItemThis Page Standard
Series and StructureShuntai PVC Ribbon Cable; UL style, conductor structure, and wire structure are confirmed according to the part number
Component CompositionConductor, insulation, and if necessary, including jacket, shielding, or cable structure; verify according to the same part number and structure
Processing and TerminationCutting, stripping, crimping, soldering, heat shrink tubing, or terminal attachment confirmed according to drawings
Number of Cores and Wire Exit DirectionVerify according to part number, number of cores, color, pitch, and termination method, not based on general specifications
Conductor and Wire GaugeAWG, number of conductor strands, single strand diameter, and conductor resistance confirmed according to the specification and actual measurement
Insulation, Jacket, and PackagingMaterial, temperature rating, color, markings, length, and packaging confirmed according to the specific part number
Substitution BoundaryDifferent UL styles, wire gauges, conductor structures, insulation materials, and temperature ratings cannot be substituted based solely on outer diameter; ribbon cables also need to be checked for pitch, number of cores, color, and termination method.

When requesting a quote, it is recommended to provide: UL style, AWG, conductor structure, number of cores and pitch, insulation or jacket material, temperature rating, color and markings, cut length, termination method, estimated quantity, and delivery time. If any of these items are missing, verify according to the drawings or samples first to avoid substitution based solely on outer diameter.

Inquiry and Alternatives

The quotation is calculated based on part number, number of cores, quantity, and delivery time; substitute models need to be compared for insulation, spacing, number of cores, and terminal type. It is recommended to provide drawings or samples for confirmation by the responsible personnel. Sample parts should be checked for wiring sequence and mating before mass production; commercial terms are subject to the contract.

Related categories and similar materials: Shuntai Wire and Ribbon Cable Classification; Shuntai Wire Agency Column; Shuntai Gray Ribbon Cable; Shuntai FEP Teflon Multi-core Color Ribbon Cable.

Get a Quote Back to List