Shuntai UL10064 Teflon High-Temperature Wire
Technical Specifications
Part Description Shuntai UL10064 (per spec sheet)
Customer Part No. Per drawing / BOM
Drawing No. Per part number
Version Series overview
Date —

Dimensions

ItemValue
UL StyleUL10064
InsulationFEP (PTFE)
ConstructionSingle core fine wire
ShieldingUnshielded
JacketNone (single-core insulated)
PitchN/A
Conductor / AWGAWG and conductor per spec sheet
ColorsPer order

Product Introduction

This wire has a single-core fine conductor structure and uses FEP Teflon insulation. The wire body is thin, suitable for dense and confined space wiring. This part number belongs to the Shuntai fine-diameter Teflon wire series, commonly used for fine wire connections and jumper wiring inside miniature devices and instruments. The color, length, and terminals can be confirmed according to the drawings. The UL style number is only for structural reference.

Structure and Specifications

This wire consists of a fine conductor and an FEP insulation layer. The wire diameter is compact and moderately flexible, making it easy to route between small components. The following structural items can be confirmed in advance, with conductor specifications and printed marks subject to the specification sheet.

  • UL Style: UL10064 (structural reference)
  • Insulation Material: FEP Teflon
  • Structure Type: Single-core fine wire
  • Shielding: Unshielded
  • Jacket: None (single-core insulated wire)
  • Color: Confirmed per order
  • Printing: According to specification sheet and order requirements

Selection Parameters

When selecting, please provide the device structure, wiring path, and connection terminals, focusing on checking the fine wire gauge, length, branching method, and terminal treatment. Wiring inside miniature devices is dense, so the spacing between adjacent components must be confirmed to avoid the wire being compressed or pulled.

ProjectExplanation
Fine Wire GaugeConfigured according to specification sheet and circuit
Length and BranchingConfirmed according to drawings
TerminalsTinned, terminal, or soldered according to drawings
Color IdentificationVerified according to order and wire number system

Application Scenarios

This type of fine-diameter Teflon wire is suitable for fine wire connections and inter-board jumpers inside miniature electronic devices and precision instruments, used in sensor circuits, low-power signal leads, etc.; the thin wire body facilitates threading into small connectors and cable channels.

  • Fine wire connections inside miniature devices
  • Internal jumpers in instruments
  • Low-power signal lead wires
  • Interconnection wiring between small components

Part Number Composition and Purchase Verification

This page of Shuntai UL10064 Teflon High-Temperature Wire is used for series-level selection. After confirming the UL style and wire structure, the specific part number, wire gauge, conductor structure, insulation or jacket, and termination processing must be aligned item by item before proceeding to inquiry or sample verification; the series page cannot replace the specific part number page.

Verification ItemThis Page Standard
Series and StructureShuntai UL10064 Teflon High-Temperature Wire; UL style, conductor structure, and wire structure are confirmed according to the part number
Component CompositionConductor, insulation, and if necessary, including jacket, shielding, or cable structure; verify according to the same part number and structure
Processing and TerminationCutting, stripping, crimping, soldering, heat shrink tubing, or terminal attachment confirmed according to drawings
Number of Cores and Wire Exit DirectionVerify according to part number, number of cores, color, pitch, and termination method, not based on general specifications
Conductor and Wire GaugeAWG, number of conductor strands, single strand diameter, and conductor resistance confirmed according to the specification and actual measurement
Insulation, Jacket, and PackagingMaterial, temperature rating, color, markings, length, and packaging confirmed according to the specific part number
Substitution BoundaryDifferent UL styles, wire gauges, conductor structures, insulation materials, and temperature ratings cannot be substituted based solely on outer diameter; ribbon cables also need to be checked for pitch, number of cores, color, and termination method.

When requesting a quote, it is recommended to provide: UL style, AWG, conductor structure, number of cores and pitch, insulation or jacket material, temperature rating, color and markings, cut length, termination method, estimated quantity, and delivery time. If any of these items are missing, verify according to the drawings or samples first to avoid substitution based solely on outer diameter.

Inquiry and Substitutes

Prices are quoted based on part number, quantity, and delivery time; for substitution checks, please provide the part number to be replaced, drawing, or sample. The contact personnel will compare wire diameter, insulation, and terminals before giving suggestions. First, confirm the appearance and conductivity of the sample, then arrange for bulk production; business matters are handled according to the contract and order terms.

Related categories and similar materials: Shuntai Wire and Ribbon Cable Categories; Shuntai Wire Agency Column; Shuntai UL1330 Teflon High-Temperature Wire; Shuntai PVC Ribbon Cable.

Get a Quote Back to List