Shuntai UL1015 20AWG PVC Electronic Wire | 600V 105℃ Single Core
Product Introduction
The Shuntai UL1015 20AWG is a single-core electronic wire with PVC insulation. The common UL1015 structure features 600V, 105℃ PVC insulation, with the insulation layer thicker than that of the UL1007. It is suitable for internal power supply, lighting, and internal wiring of equipment that requires certain mechanical protection. This page is established based on the 20AWG single wire gauge to facilitate retrieval by conductor structure, finished outer diameter, and conductor resistance. UL1015 is a structure index; the actual conductor structure, printing, certification, color, and packaging of Shuntai should be based on the specification sheet and samples.
Structure and Matching
The common UL1015 structure consists of a stranded conductor with PVC insulation. The conductor can be bare copper or tinned copper, and the nominal insulation thickness is approximately 0.79mm. The common structure for 20AWG is 26/0.160, with a conductor outer diameter of about 0.94mm and a finished outer diameter of about 2.52mm. The actual conductor used by Shuntai, whether it is tinned, the printing content, and certification number must be verified according to the Shuntai specification sheet and wire body printing; the parameters on this page are for selection and retrieval purposes only and do not replace Shuntai's shipping specifications.
Selection Parameters
The table below is organized according to the public catalog and drawings. The specific plating, pin positions, color, packaging, and matching wire gauge should be based on the part number specification sheet, drawings, or samples.
| Item | Parameter/Description |
|---|---|
| UL Style | UL1015 |
| Rated Temperature | 105℃ |
| Rated Voltage | 600V |
| Insulation | PVC Single Core |
| Wire Gauge | 20AWG |
| Conductor Structure | 26/0.160 |
| Conductor Outer Diameter | 0.94 mm |
| Nominal Insulation Thickness | 0.79 mm |
| Finished Outer Diameter | 2.52 mm |
| Conductor Resistance | 36.70Ω/km (20℃) |
| Flame Retardant | Corresponding to VW-1 / FT1 for common structure; actual standard subject to specification |
| Color | To be confirmed by order |
| Current Carrying Capacity | No fixed value; calculated according to full machine safety regulations, temperature rise, and derating |
| Packaging | Confirmed based on order length and packaging type |
Same Series Part Numbers and Matching
The following part numbers are for search, matching verification, and quotation communication, and do not represent the full supply range.
| Part Number | Description | Application / Use |
|---|---|---|
| UL1015 20AWG | 26/0.160 / OD 2.52mm | This page |
| UL1015 18 | Adjacent wire gauge, check according to drawing | shuntai-ul1015-18awg |
| UL1015 22 | Adjacent wire gauge, check according to drawing | shuntai-ul1015-22awg |
| UL1007 22AWG | Thinner insulation, OD 1.60mm | shuntai-ul1007-22awg |
| UL1007 24AWG | Thinner insulation, OD 1.40mm | shuntai-ul1007-24awg |
Application Scenarios
Typical scenarios suitable for 20AWG internal power branch wiring to load boards include:
- 20AWG internal power branch wiring to load boards
- Lighting fixtures, power boards, and internal device wiring
- Situations requiring thicker PVC insulation and certain mechanical protection
Inquiry and Substitution
For inquiries, please provide wire gauge, color, conductor structure, finished outer diameter, cutting length, stripping/tinning requirements, and terminal crimping method; for substitution, verify insulation thickness, outer diameter, conductor resistance, and terminal compatibility range. Do not replace directly based solely on UL style matching.
Related links: UL1015 Series Page; Shuntai Wires and Ribbon Cables Classification; Shuntai Brand Materials Column; Agent Material Part Number Index.