Shuntai UL1330 Teflon High-Temperature Wire
Product Introduction
This wire is of a single-core structure, with the insulation layer made of FEP Teflon. It has a smooth surface and uniform coating, making it easy to thread and connect. This part number belongs to the Shuntai Teflon Wire series and is commonly used for internal wiring in electronic devices, instruments, and sensor circuits. Wire gauge, color, and length can be confirmed according to the drawings. The UL style number is provided only as a structural reference and does not represent a certification declaration.
Structure and Specifications
Structurally, the wire consists of a conductor and an FEP insulation layer. The insulation is dense and the wire is firm, suitable for routing between compact boards and components. The following items can be preliminarily checked, while conductor specifications and markings should be confirmed according to the datasheet.
- UL Style: UL1330 (structural reference)
- Insulation Material: FEP Teflon
- Structure Type: Single-core wire
- Shielding: Unshielded
- Jacket: None (single-core insulated wire)
- Color: To be confirmed according to order
- Marking: According to datasheet and order requirements
Selection Parameters
During the selection phase, please provide the equipment type, routing location, and terminal requirements. Focus on checking wire gauge, length, whether the ends are tinned or have crimped terminals, color, and wire number markings. For dense wiring, wire diameter and arrangement should be confirmed according to assembly space to avoid interference with other harnesses.
| Project | Explanation |
|---|---|
| Wire Gauge and Conductor | Selected according to datasheet and circuit |
| Length | Cut in segments according to drawings |
| Terminals | Tinned, terminal, or connector confirmed according to drawings |
| Identification | Color and markings correspond to the main wiring numbers |
Application Scenarios
This type of Teflon single-core wire is widely used for internal wiring in electronic devices, internal connections in instruments, and sensor leads. It handles signal or low-power connections in areas such as inter-board connections and component lead-outs. The smooth surface also facilitates threading through narrow routing spaces.
- Internal wiring of electronic devices
- Internal wiring of instruments and meters
- Lead wires for sensors and controllers
- Board-to-board jumpers and component lead wires
Part Number Composition and Purchase Verification
This page of Shuntai UL1330 Teflon High-Temperature Wire is used for series-level selection. After confirming the UL style and wire structure, the specific part number, wire gauge, conductor structure, insulation or jacket, and termination processing must be aligned item by item before proceeding to inquiry or sample verification; the series page cannot replace the specific part number page.
| Verification Item | This Page Standard |
|---|---|
| Series and Structure | Shuntai UL1330 Teflon High-Temperature Wire; UL style, conductor structure, and wire structure are confirmed according to the part number |
| Component Composition | Conductor, insulation, and if necessary, including jacket, shielding, or cable structure; verify according to the same part number and structure |
| Processing and Termination | Cutting, stripping, crimping, soldering, heat shrink tubing, or terminal attachment confirmed according to drawings |
| Number of Cores and Wire Exit Direction | Verify according to part number, number of cores, color, pitch, and termination method, not based on general specifications |
| Conductor and Wire Gauge | AWG, number of conductor strands, single strand diameter, and conductor resistance confirmed according to the specification and actual measurement |
| Insulation, Jacket, and Packaging | Material, temperature rating, color, markings, length, and packaging confirmed according to the specific part number |
| Substitution Boundary | Different UL styles, wire gauges, conductor structures, insulation materials, and temperature ratings cannot be substituted based solely on outer diameter; ribbon cables also need to be checked for pitch, number of cores, color, and termination method. |
When requesting a quote, it is recommended to provide: UL style, AWG, conductor structure, number of cores and pitch, insulation or jacket material, temperature rating, color and markings, cut length, termination method, estimated quantity, and delivery time. If any of these items are missing, verify according to the drawings or samples first to avoid substitution based solely on outer diameter.
Inquiry and Replacement
Prices are quoted based on part number, quantity, and delivery time; if a replacement model is needed, please provide the existing part number, drawings, or samples, so that the responsible personnel can confirm the interchangeability by comparing insulation materials, wire gauge, and terminal types. Prototype samples should be verified for structure and appearance before arranging mass supply; payment, discounts, and other matters are implemented according to the contract.
Related sections and similar materials: Shuntai Wires and Ribbon Cables Categories; Shuntai Wires Agency Section; Shuntai UL1332 Teflon High-Temperature Wire; Shuntai FEP Teflon Multi-Core Ribbon Cable.