Shuntai UL1332 Teflon High-Temperature Wire
Technical Specifications
Part Description Shuntai UL1332 (per spec sheet)
Customer Part No. Per drawing / BOM
Drawing No. Per part number
Version Series overview
Date —

Dimensions

ItemValue
UL StyleUL1332
InsulationFEP (PTFE)
ConstructionSingle core
ShieldingUnshielded
JacketNone (single-core insulated)
PitchN/A
Conductor / AWGAWG and conductor per spec sheet
ColorsPer order

Product Introduction

This wire is a single-core FEP insulated wire, with a tightly wrapped insulation layer, a firm wire body, and a wear-resistant surface. This part number belongs to the Shuntai Teflon single-core wire series, suitable for internal connections in small appliances, lighting, and industrial control boards. The color, length, and terminal processing method can be specified according to orders. The page number serves as a structural index, and actual parameters are based on the specification sheet and samples.

Structure and Specifications

The wire body consists of a conductor and an FEP insulation layer. The thickness of the insulation layer and wire gauge is determined according to the specification sheet; the single-core structure allows for individual wiring and branching. The table below lists the structural items. Details not listed, such as conductor specifics and marking content, should be checked against the specification sheet.

  • UL Style: UL1332 (structural index)
  • Insulation Material: FEP Teflon
  • Structure Type: Single-core wire
  • Shielding: Non-shielded
  • Jacket: None (single-core insulated wire)
  • Color: Confirmed per order
  • Marking: According to specification sheet and order requirements

Selection Parameters

When selecting, please provide circuit application, assembly location, and terminal type, and verify wire gauge, length, color, marking, and whether crimp terminals are needed. If used in densely populated control board areas, the wiring width and fixing method should be confirmed based on the layout of components on the board.

ProjectExplanation
Wire GaugeSelected according to specification sheet and circuit
Cut LengthConfirmed based on drawings
Terminal TreatmentTin-plated or crimped terminals as per drawings
Color and Wire NumberCorresponding to the overall machine identification system

Applications

This wire is commonly used for internal wiring in small appliances, lead wires for lighting fixtures, and internal connections in industrial control boards. It is used in component leads, inter-board connections, and similar locations; the firm wire body facilitates positioning and organization during assembly.

  • Internal connection wires for small appliances
  • Internal lead wires for lighting fixtures
  • Wiring for industrial control boards
  • Interconnection sections between device components

Part Number Composition and Purchase Verification

This page of Shuntai UL1332 Teflon High-Temperature Wire is used for series-level selection. After confirming the UL style and wire structure, the specific part number, wire gauge, conductor structure, insulation or jacket, and termination processing must be aligned item by item before proceeding to inquiry or sample verification; the series page cannot replace the specific part number page.

Verification ItemThis Page Standard
Series and StructureShuntai UL1332 Teflon High-Temperature Wire; UL style, conductor structure, and wire structure are confirmed according to the part number
Component CompositionConductor, insulation, and if necessary, including jacket, shielding, or cable structure; verify according to the same part number and structure
Processing and TerminationCutting, stripping, crimping, soldering, heat shrink tubing, or terminal attachment confirmed according to drawings
Number of Cores and Wire Exit DirectionVerify according to part number, number of cores, color, pitch, and termination method, not based on general specifications
Conductor and Wire GaugeAWG, number of conductor strands, single strand diameter, and conductor resistance confirmed according to the specification and actual measurement
Insulation, Jacket, and PackagingMaterial, temperature rating, color, markings, length, and packaging confirmed according to the specific part number
Substitution BoundaryDifferent UL styles, wire gauges, conductor structures, insulation materials, and temperature ratings cannot be substituted based solely on outer diameter; ribbon cables also need to be checked for pitch, number of cores, color, and termination method.

When requesting a quote, it is recommended to provide: UL style, AWG, conductor structure, number of cores and pitch, insulation or jacket material, temperature rating, color and markings, cut length, termination method, estimated quantity, and delivery time. If any of these items are missing, verify according to the drawings or samples first to avoid substitution based solely on outer diameter.

Inquiry and Substitutes

Quotations are calculated based on part number, quantity, and delivery time; substitute part numbers must be confirmed item by item against structure, insulation, and terminals, and it is recommended to provide drawings or samples. After sample confirmation, bulk production will be arranged. Business terms are subject to the formal contract and order; discount and payment methods are not listed on this page.

Related categories and similar materials: Shuntai Wire and Ribbon Cable Classification; Shuntai Wire Agency Column; Shuntai UL1330 Teflon High-Temperature Wire; Shuntai FEP Teflon Multi-Core Color Ribbon Cable.

Get a Quote Back to List