Shuntai UL20723 Multi-core Teflon Shielded Jacketed Wire
Technical Specifications
Part Description Shuntai UL20723 (per spec sheet)
Customer Part No. Per drawing / BOM
Drawing No. Per part number
Version Series overview
Date —

Dimensions

ItemValue
UL StyleUL20723
InsulationFEP (PTFE)
ConstructionMulti-core shielded sheathed wire
ShieldingShielding per spec sheet
JacketOuter jacket per spec sheet
PitchN/A
Core count / AWGCore count and AWG per spec sheet
ColorsPer order

Product Introduction

This cable consists of FEP-insulated multi-core wires, a shielding layer, and an outer sheath. It is used for internal connection scenarios that require signal anti-interference. This part number belongs to the Shuntai shielded multi-core cable series, commonly used in instrument sensor cables and equipment signal circuits. The number of cores and shielding type should be confirmed according to the specifications and drawings. The UL style number is only used as a structural reference.

Structure and Specifications

The product contains multiple FEP-insulated cores inside, with an outer shielding layer and an outer sheath on the outside. The layered structure is used for bundle protection and signal isolation. The following items can be pre-checked; the shielding type, number of cores, and sheath color should be confirmed according to the specifications.

  • UL Style: UL20723 (structural reference)
  • Core insulation: FEP (Teflon)
  • Shielding: Shielding structure (as per specifications)
  • Sheath: Outer sheath (as per specifications)
  • Structure type: Multi-core shielded cable
  • Number of cores: Confirm according to drawings and specifications
  • Color: Confirm per order

Selection Parameters

When selecting, please provide the signal type, circuit list, connection form at both ends, and installation location, and verify the number of cores, wire gauge, shielding method, sheath color, and cable length. The grounding of the shielding layer and termination handling should be clearly specified in the drawings to avoid interference when running parallel with other power harnesses.

ProjectExplanation
Number of cores and wire gaugeSelected according to signal circuit
Shielding and groundingHandled as per drawing requirements
Sheath and colorConfirm per order
Termination planTerminals/connectors selected according to drawings

Application Scenarios

This cable is used for instrument sensor signal leads, internal equipment shielded signal circuits, and multi-core connections requiring interference isolation; in scenarios where signal lines and power lines are laid in parallel, the shielding structure facilitates corresponding handling according to drawings.

  • Instrument sensor signal connection cables
  • Internal equipment shielded signal circuits
  • Multi-core signal lead harnesses
  • Internal wiring with high anti-interference requirements

Part Number Composition and Purchase Verification

This page of Shuntai UL20723 Multi-core Teflon Shielded Jacketed Wire is used for series-level selection. After confirming the UL style and wire structure, the specific part number, wire gauge, conductor structure, insulation or jacket, and termination processing must be aligned item by item before proceeding to inquiry or sample verification; the series page cannot replace the specific part number page.

Verification ItemThis Page Standard
Series and StructureShuntai UL20723 Multi-core Teflon Shielded Jacketed Wire; UL style, conductor structure, and wire structure are confirmed according to the part number
Component CompositionConductor, insulation, and if necessary, including jacket, shielding, or cable structure; verify according to the same part number and structure
Processing and TerminationCutting, stripping, crimping, soldering, heat shrink tubing, or terminal attachment confirmed according to drawings
Number of Cores and Wire Exit DirectionVerify according to part number, number of cores, color, pitch, and termination method, not based on general specifications
Conductor and Wire GaugeAWG, number of conductor strands, single strand diameter, and conductor resistance confirmed according to the specification and actual measurement
Insulation, Jacket, and PackagingMaterial, temperature rating, color, markings, length, and packaging confirmed according to the specific part number
Substitution BoundaryDifferent UL styles, wire gauges, conductor structures, insulation materials, and temperature ratings cannot be substituted based solely on outer diameter; ribbon cables also need to be checked for pitch, number of cores, color, and termination method.

When requesting a quote, it is recommended to provide: UL style, AWG, conductor structure, number of cores and pitch, insulation or jacket material, temperature rating, color and markings, cut length, termination method, estimated quantity, and delivery time. If any of these items are missing, verify according to the drawings or samples first to avoid substitution based solely on outer diameter.

Inquiry and Substitution

Quotes are calculated based on part number, number of cores, quantity, and delivery time; substitute models need to be confirmed against insulation, shielding, number of cores, and terminals. It is recommended to provide drawings or samples. Sample parts should be checked for core sequence, shielding treatment, and appearance before mass production; business matters are handled according to the contract.

Related sections and similar materials: Shuntai Wire and Cable Classification; Shuntai Wire Agency Section; Shuntai UL4389 Teflon Silicone Multi-core Wire; Shuntai FEP Teflon Multi-core Ribbon Wire.

Get a Quote Back to List