Shuntai UL3132 Silicone Rubber High-Temperature Resistant Wire
Product Introduction
This wire uses a single-core structure, with an insulation layer made of silicone rubber. The wire is flexible and has good resilience after bending. This part number belongs to the Shuntai silicone rubber single-core wire series and is commonly used for internal wiring of small household appliances, lighting, and small electromechanical equipment. It can be cut and separated according to customer drawings and the handling method of both ends can be confirmed. The UL style number is only for structural reference, with specifications based on the datasheet and physical samples.
Structure and Specifications
The wire consists of a conductor covered with silicone rubber insulation, featuring a smooth surface and a small bending radius, suitable for routing in compact spaces. The table below lists confirmable structural items; conductor specifications, printing fields, and other details should be determined according to the datasheet and order.
- UL Style: UL3132 (structural reference)
- Insulation Material: Silicone rubber
- Structure Type: Single-core wire
- Shielding: Non-shielded
- Sheath: None (single-core insulated wire)
- Color: Confirmed per order
- Printing: Marked according to datasheet and order requirements
Selection Parameters
When selecting a wire, it is recommended to first clarify the application equipment, circuit location, and connection terminals, then provide drawings or BOM. Each item should be checked for wire gauge, lead length, whether terminals need crimping, color coding, and separation method; if bundled with other wires side by side, spacing and fixing methods should also be verified.
| Project | Explanation |
|---|---|
| Wire gauge and conductor | Selected according to datasheet |
| Lead length | Cut according to drawing dimensions |
| Terminal handling | Bare wire, tin-plated, or terminal crimping confirmed by drawing |
| Color coding | Corresponding to the complete machine wiring number system |
Application Scenarios
This wire is mainly used for flexible internal wiring of small household appliances and surrounding electromechanical equipment. It provides circuit connections inside appliances such as heaters, kitchen small appliances, and lighting fixtures. During assembly, it can be routed along the inside of cabinets or enclosures for easy binding and fixing.
- Internal power supply and signal leads for small appliances
- Wiring for peripheral devices of heaters and ovens
- Internal wiring of lighting fixtures
- Internal connection segments of instrumentation equipment
Part Number Composition and Purchase Verification
This page of Shuntai UL3132 Silicone Rubber High-Temperature Resistant Wire is used for series-level selection. After confirming the UL style and wire structure, the specific part number, wire gauge, conductor structure, insulation or jacket, and termination processing must be aligned item by item before proceeding to inquiry or sample verification; the series page cannot replace the specific part number page.
| Verification Item | This Page Standard |
|---|---|
| Series and Structure | Shuntai UL3132 Silicone Rubber High-Temperature Resistant Wire; UL style, conductor structure, and wire structure are confirmed according to the part number |
| Component Composition | Conductor, insulation, and if necessary, including jacket, shielding, or cable structure; verify according to the same part number and structure |
| Processing and Termination | Cutting, stripping, crimping, soldering, heat shrink tubing, or terminal attachment confirmed according to drawings |
| Number of Cores and Wire Exit Direction | Verify according to part number, number of cores, color, pitch, and termination method, not based on general specifications |
| Conductor and Wire Gauge | AWG, number of conductor strands, single strand diameter, and conductor resistance confirmed according to the specification and actual measurement |
| Insulation, Jacket, and Packaging | Material, temperature rating, color, markings, length, and packaging confirmed according to the specific part number |
| Substitution Boundary | Different UL styles, wire gauges, conductor structures, insulation materials, and temperature ratings cannot be substituted based solely on outer diameter; ribbon cables also need to be checked for pitch, number of cores, color, and termination method. |
When requesting a quote, it is recommended to provide: UL style, AWG, conductor structure, number of cores and pitch, insulation or jacket material, temperature rating, color and markings, cut length, termination method, estimated quantity, and delivery time. If any of these items are missing, verify according to the drawings or samples first to avoid substitution based solely on outer diameter.
Quotation and Substitution
Quotations are calculated based on specific part numbers, order quantity, and delivery schedule; for substitute part numbers, verification requires providing the part number to be replaced, drawings, or samples. The liaison personnel will compare the structure, insulation, and terminals before giving corresponding recommendations. After the sample confirmation is correct, it will proceed to mass production arrangement. Commercial terms are subject to the contract agreement.
Related sections and similar materials: Shuntai Wire and Ribbon Cable Categories; Shuntai Wire Agency Section; Shuntai UL3135 Silicone Rubber High-Temperature Wire; Shuntai FEP Teflon Multi-Core Color Ribbon Cable.