Shuntai UL3135 Silicone Rubber High-Temperature Resistant Wire
Technical Specifications
Part Description Shuntai UL3135 (per spec sheet)
Customer Part No. Per drawing / BOM
Drawing No. Per part number
Version Series overview
Date —

Dimensions

ItemValue
UL StyleUL3135
InsulationSilicone rubber
ConstructionSingle core
ShieldingUnshielded
JacketNone (single-core insulated)
PitchN/A
Conductor / AWGAWG and conductor per spec sheet
ColorsPer order

Product Introduction

This wire has a single-core structure and is insulated with silicone rubber. The wire is flexible and easy to bend for routing. This part number belongs to the Shuntai Silicone Wire series, used as internal connecting wires for home appliances, lighting, and small devices. Wire gauge, color, and length can be cut according to drawings. The UL style numbers listed on this page are for structural reference only; specific structural parameters should be based on the latest datasheet and samples.

Structure and Specifications

Structurally, this product consists of a conductor and a silicone rubber insulation layer, forming a single-core wire. The insulation is evenly coated, and the surface is flexible and easy to bend. The following structural items can be confirmed during selection. For wire gauge combinations and printing information not listed, please refer to the datasheet.

  • UL Style: UL3135 (structural reference)
  • Insulation Material: Silicone Rubber
  • Structure Type: Single-core wire
  • Shielding: Unshielded
  • Jacket: None (single-core insulated wire)
  • Color: Confirmed per order; standard colors are per datasheet
  • Printing: Wire printing according to datasheet and order requirements

Selection Parameters

When selecting, please consider the layout and connection method of the device circuit. Provide drawings or a BOM list, and the responsible personnel will verify the conductor, insulation, and length according to the part number. Items to confirm include wire gauge, output length, end treatments, color, and marking requirements; for bundled or parallel wiring, the number of cores and arrangement must also be verified.

ProjectExplanation
Wire GaugeSelected according to datasheet and circuit requirements
Length and CuttingProcessed according to drawing dimensions
End TreatmentBare wire, tinned, or crimped terminals confirmed per drawing
Color and PrintingVerified according to order and marking system

Application Scenarios

This type of single-core silicone wire is commonly used in areas inside equipment that require flexible wiring, used in internal wiring for home appliances, lighting fixtures, and small electromechanical devices. In circuits with compact assembly space that require repeated bending, the flexible wire is easy to organize and secure.

  • Internal connections and leads of household appliances
  • Internal wiring of lighting fixtures
  • Internal wires of small appliances and devices
  • Lead wires near motors and sensors

Part Number Composition and Purchase Verification

This page of Shuntai UL3135 Silicone Rubber High-Temperature Resistant Wire is used for series-level selection. After confirming the UL style and wire structure, the specific part number, wire gauge, conductor structure, insulation or jacket, and termination processing must be aligned item by item before proceeding to inquiry or sample verification; the series page cannot replace the specific part number page.

Verification ItemThis Page Standard
Series and StructureShuntai UL3135 Silicone Rubber High-Temperature Resistant Wire; UL style, conductor structure, and wire structure are confirmed according to the part number
Component CompositionConductor, insulation, and if necessary, including jacket, shielding, or cable structure; verify according to the same part number and structure
Processing and TerminationCutting, stripping, crimping, soldering, heat shrink tubing, or terminal attachment confirmed according to drawings
Number of Cores and Wire Exit DirectionVerify according to part number, number of cores, color, pitch, and termination method, not based on general specifications
Conductor and Wire GaugeAWG, number of conductor strands, single strand diameter, and conductor resistance confirmed according to the specification and actual measurement
Insulation, Jacket, and PackagingMaterial, temperature rating, color, markings, length, and packaging confirmed according to the specific part number
Substitution BoundaryDifferent UL styles, wire gauges, conductor structures, insulation materials, and temperature ratings cannot be substituted based solely on outer diameter; ribbon cables also need to be checked for pitch, number of cores, color, and termination method.

When requesting a quote, it is recommended to provide: UL style, AWG, conductor structure, number of cores and pitch, insulation or jacket material, temperature rating, color and markings, cut length, termination method, estimated quantity, and delivery time. If any of these items are missing, verify according to the drawings or samples first to avoid substitution based solely on outer diameter.

Inquiry and Substitution

Prices are quoted based on part number, quantity, and delivery time; if substitution of part numbers or verification of similar models is needed, please provide the existing part number, drawings, or samples. The contact person will confirm whether substitution is possible based on structure and specifications. During the sampling stage, it is recommended to confirm the sample and markings before arranging bulk supply. This page does not provide discounts, payment methods, or other commercial terms; related matters are executed according to contract and order agreements.

Related sections and similar materials: Shuntai Wires and Ribbon Cables Classification; Shuntai Wire Agency Column; Shuntai UL3132 Silicone Rubber High-Temperature Wire; Shuntai FEP Teflon Multi-Core Color Ribbon Cable.

Get a Quote Back to List