Shuntai UL3512 Silicone Rubber High-Temperature Resistant Wire
Technical Specifications
Part Description Shuntai UL3512 (per spec sheet)
Customer Part No. Per drawing / BOM
Drawing No. Per part number
Version Series overview
Date —

Dimensions

ItemValue
UL StyleUL3512
InsulationSilicone rubber
ConstructionSingle core
ShieldingUnshielded
JacketNone (single-core insulated)
PitchN/A
Conductor / AWGAWG and conductor per spec sheet
ColorsPer order

Product Introduction

This wire has a single-core structure, tightly covered with silicone rubber insulation. The wire is flexible and can withstand repeated bending. This part number belongs to the Shuntai silicone single-core wire series, used for wiring around electric heating appliances, sensor circuits, and inside small devices. The length and ends are processed according to the drawings. The page number serves as a structural index and does not constitute a performance or certification commitment.

Structure and Specifications

This product consists of a conductor and a silicone rubber insulation layer. The insulation layer fits tightly to the wire core, with a flexible and bend-resistant surface. The table below lists structural items. Wire gauge, printing, and color details are determined according to the specifications and the order.

  • UL Style: UL3512 (structural index)
  • Insulation Material: Silicone Rubber
  • Structure Type: Single-core Wire
  • Shielding: Unshielded
  • Sheath: None (single-core insulated wire)
  • Color: Confirmed as per order
  • Printing: According to specifications and order requirements

Selection Parameters

When selecting the wire, please clarify the equipment, wiring route, and connection ends, and verify the wire gauge, length, end processing, color, and labeling requirements. For sensor circuits, each wire number needs to correspond to the controller or terminal block.

ProjectExplanation
Wire GaugeSelected according to specifications and circuit
Length and CuttingConfirmed according to drawings
End ProcessingTin plating or terminal crimping as per drawings
Color and PrintingCorresponding to the overall machine wire numbering system

Application Scenarios

This wire is suitable for wiring around electric heating appliances, lead wires for sensor circuits, and internal wiring of small devices, used in areas requiring flexible and bend-resistant routing. During assembly, it can be organized and fixed along the inner walls of the device or near brackets.

  • Connection wires around electric heating appliances
  • Lead wires for sensor circuits
  • Internal wiring of small devices
  • Flexible inter-device lead wires

Part Number Composition and Purchase Verification

This page of Shuntai UL3512 Silicone Rubber High-Temperature Resistant Wire is used for series-level selection. After confirming the UL style and wire structure, the specific part number, wire gauge, conductor structure, insulation or jacket, and termination processing must be aligned item by item before proceeding to inquiry or sample verification; the series page cannot replace the specific part number page.

Verification ItemThis Page Standard
Series and StructureShuntai UL3512 Silicone Rubber High-Temperature Resistant Wire; UL style, conductor structure, and wire structure are confirmed according to the part number
Component CompositionConductor, insulation, and if necessary, including jacket, shielding, or cable structure; verify according to the same part number and structure
Processing and TerminationCutting, stripping, crimping, soldering, heat shrink tubing, or terminal attachment confirmed according to drawings
Number of Cores and Wire Exit DirectionVerify according to part number, number of cores, color, pitch, and termination method, not based on general specifications
Conductor and Wire GaugeAWG, number of conductor strands, single strand diameter, and conductor resistance confirmed according to the specification and actual measurement
Insulation, Jacket, and PackagingMaterial, temperature rating, color, markings, length, and packaging confirmed according to the specific part number
Substitution BoundaryDifferent UL styles, wire gauges, conductor structures, insulation materials, and temperature ratings cannot be substituted based solely on outer diameter; ribbon cables also need to be checked for pitch, number of cores, color, and termination method.

When requesting a quote, it is recommended to provide: UL style, AWG, conductor structure, number of cores and pitch, insulation or jacket material, temperature rating, color and markings, cut length, termination method, estimated quantity, and delivery time. If any of these items are missing, verify according to the drawings or samples first to avoid substitution based solely on outer diameter.

Inquiry and Alternatives

Prices are quoted based on part number, quantity, and delivery time; for substitutions, it is necessary to provide the part number being replaced, drawings, or samples. The coordinating personnel will compare the insulation and terminals and then provide suggestions. Confirm samples first before arranging bulk production. Commercial terms are subject to the contract and order.

Related categories and similar materials: Shuntai Wire and Ribbon Cable Classification; Shuntai Wire Agency Column; Shuntai UL3689 Silicone Rubber High Temperature Wire; Shuntai PVC Ribbon Cable.

Get a Quote Back to List