Shuntai UL3689 Silicone Rubber High-Temperature Resistant Wire
Technical Specifications
Part Description Shuntai UL3689 (per spec sheet)
Customer Part No. Per drawing / BOM
Drawing No. Per part number
Version Series overview
Date —

Dimensions

ItemValue
UL StyleUL3689
InsulationSilicone rubber
ConstructionSingle core
ShieldingUnshielded
JacketNone (single-core insulated)
PitchN/A
Conductor / AWGAWG and conductor per spec sheet
ColorsPer order

Product Introduction

This wire has a single-core structure, with a silicone rubber insulation layer. The wire body is soft and easy to bend. This part number belongs to the Shuntai silicone single-core wire series, commonly used as motor leads, internal wiring for lighting fixtures, and connection wires inside power equipment. Wire gauge, color, and length can be confirmed according to drawings. The number is for structural reference only; parameters are based on the specification sheet and samples.

Structure and Specifications

The wire body consists of a conductor covered with silicone rubber insulation. The surface is soft and flexible, suitable for routing along structural surfaces inside equipment. The following structural items can be confirmed in advance, and conductor specifications and markings should be checked against the specification sheet.

  • UL Style: UL3689 (structural reference)
  • Insulation Material: Silicone Rubber
  • Structure Type: Single-core wire
  • Shielding: Unshielded
  • Sheath: None (single-core insulated wire)
  • Color: To be confirmed according to order
  • Marking: According to specification sheet and order requirements

Selection Parameters

When selecting, please provide the installation location, circuit purpose, and terminal type, and verify wire gauge, lead length, whether terminals will be crimped, color, and identification. Wiring near motors and lighting fixtures needs to confirm the fixation method to avoid the wire being subjected to long-term pulling or abrasion.

ProjectExplanation
Wire gauge and conductorSelected according to specification sheet
LengthCut in segments as per drawings
TerminalsBare wire, tinned, or terminal to be confirmed according to drawings
Color and wire numberVerified according to order markings

Application Scenarios

This wire is mainly used for motor leads, internal wiring of lighting fixtures, and circuit connections in power supply equipment. It provides flexible circuit connections inside equipment where flexible routing is needed; the soft wire body facilitates following structural surfaces during assembly.

  • Motor and appliance lead wires
  • Internal connection wires for lighting fixtures
  • Internal wiring for power supply equipment
  • Lead wires between small devices

Part Number Composition and Purchase Verification

This page of Shuntai UL3689 Silicone Rubber High-Temperature Resistant Wire is used for series-level selection. After confirming the UL style and wire structure, the specific part number, wire gauge, conductor structure, insulation or jacket, and termination processing must be aligned item by item before proceeding to inquiry or sample verification; the series page cannot replace the specific part number page.

Verification ItemThis Page Standard
Series and StructureShuntai UL3689 Silicone Rubber High-Temperature Resistant Wire; UL style, conductor structure, and wire structure are confirmed according to the part number
Component CompositionConductor, insulation, and if necessary, including jacket, shielding, or cable structure; verify according to the same part number and structure
Processing and TerminationCutting, stripping, crimping, soldering, heat shrink tubing, or terminal attachment confirmed according to drawings
Number of Cores and Wire Exit DirectionVerify according to part number, number of cores, color, pitch, and termination method, not based on general specifications
Conductor and Wire GaugeAWG, number of conductor strands, single strand diameter, and conductor resistance confirmed according to the specification and actual measurement
Insulation, Jacket, and PackagingMaterial, temperature rating, color, markings, length, and packaging confirmed according to the specific part number
Substitution BoundaryDifferent UL styles, wire gauges, conductor structures, insulation materials, and temperature ratings cannot be substituted based solely on outer diameter; ribbon cables also need to be checked for pitch, number of cores, color, and termination method.

When requesting a quote, it is recommended to provide: UL style, AWG, conductor structure, number of cores and pitch, insulation or jacket material, temperature rating, color and markings, cut length, termination method, estimated quantity, and delivery time. If any of these items are missing, verify according to the drawings or samples first to avoid substitution based solely on outer diameter.

Inquiry and Alternatives

Quotations are calculated based on part number, quantity, and delivery date; substitute part numbers must be confirmed against insulation, wire gauge, and terminals. It is recommended to provide the existing part number, drawings, or samples. Sample parts should be checked for appearance and continuity before mass supply; payment and discount matters are as stipulated in the contract.

Related sections and similar materials: Shuntai Wire and Ribbon Wire Classification; Shuntai Wire Agency Section; Shuntai UL3512 Silicone Rubber High-Temperature Wire; Shuntai PVC Ribbon Wire.

Get a Quote Back to List