Shuntai UL4594 Multi-core Silicone Sheathed Wire
Technical Specifications
Part Description Shuntai UL4594 (per spec sheet)
Customer Part No. Per drawing / BOM
Drawing No. Per part number
Version Series overview
Date —

Dimensions

ItemValue
UL StyleUL4594
InsulationSilicone rubber
ConstructionMulti-core sheathed wire
ShieldingUnshielded
JacketSilicone rubber jacket
PitchN/A
Core count / AWGCore count and AWG per spec sheet
ColorsPer order

Product Introduction

This multi-core cable is composed of multiple insulated cores covered with a silicone rubber sheath. The bundled structure facilitates overall routing and securing. This part number belongs to the Shuntai multi-core silicone wire series and is used for internal multi-circuit connections in household appliances, power lead-outs for equipment, and internal harnesses for electromechanical devices. The number of cores and arrangement should be confirmed according to the drawings. The UL style number serves only as a structural reference, with parameters based on the specification sheet and samples.

Structure and Specifications

The product consists of multiple insulated cores internally, covered externally with a silicone rubber sheath. The flexible bundled wire can be laid out as a whole. The table below lists the confirmable structural items. The number of cores, conductor specifications, and sheath color should be verified against the specification sheet and the order.

  • UL Style: UL4594 (structural reference)
  • Core Insulation: Silicone rubber
  • Sheath Material: Silicone rubber
  • Structure Type: Multi-core sheathed wire
  • Shielding: Unshielded
  • Number of Cores: Confirmed according to specification sheet and drawings
  • Color: Confirmed according to order

Selection Parameters

When selecting, please provide the number of device circuits, routing length, and connection method at both ends, and check the number of cores, wire gauge of each core, sheath color, lead-out length, and branch positions. Multi-core wires need to match the terminals or connectors at both ends, and the end solution should be specified in the drawings.

ProjectExplanation
Number of Cores and Wire GaugeSelected according to circuit list
Sheath and ColorConfirmed according to order
Length and BranchingProcessed according to drawings
End TerminationsTerminals, connectors, or bare wires as selected in drawings

Application Scenarios

This multi-core sheathed wire is suitable for bundled internal connections in household appliances, power lead-out lines for equipment, and internal wiring of small electromechanical devices. It is used in areas where multiple signal or power lines need to be routed together, with the sheath facilitating organization and protection.

  • Bundled multi-circuit wiring inside household appliances
  • Power lead-out lines for equipment
  • Internal connection wires for small electromechanical devices
  • Bundled wiring in instrumentation and equipment

Part Number Composition and Purchase Verification

This page of Shuntai UL4594 Multi-core Silicone Sheathed Wire is used for series-level selection. After confirming the UL style and wire structure, the specific part number, wire gauge, conductor structure, insulation or jacket, and termination processing must be aligned item by item before proceeding to inquiry or sample verification; the series page cannot replace the specific part number page.

Verification ItemThis Page Standard
Series and StructureShuntai UL4594 Multi-core Silicone Sheathed Wire; UL style, conductor structure, and wire structure are confirmed according to the part number
Component CompositionConductor, insulation, and if necessary, including jacket, shielding, or cable structure; verify according to the same part number and structure
Processing and TerminationCutting, stripping, crimping, soldering, heat shrink tubing, or terminal attachment confirmed according to drawings
Number of Cores and Wire Exit DirectionVerify according to part number, number of cores, color, pitch, and termination method, not based on general specifications
Conductor and Wire GaugeAWG, number of conductor strands, single strand diameter, and conductor resistance confirmed according to the specification and actual measurement
Insulation, Jacket, and PackagingMaterial, temperature rating, color, markings, length, and packaging confirmed according to the specific part number
Substitution BoundaryDifferent UL styles, wire gauges, conductor structures, insulation materials, and temperature ratings cannot be substituted based solely on outer diameter; ribbon cables also need to be checked for pitch, number of cores, color, and termination method.

When requesting a quote, it is recommended to provide: UL style, AWG, conductor structure, number of cores and pitch, insulation or jacket material, temperature rating, color and markings, cut length, termination method, estimated quantity, and delivery time. If any of these items are missing, verify according to the drawings or samples first to avoid substitution based solely on outer diameter.

Inquiry and Alternatives

Prices are inquired according to part number, number of cores, quantity, and delivery time; for alternative models, verification requires providing the existing part number, drawings, or samples, which will be compared by the liaison personnel for the number of cores, insulation, sheath, and terminals before confirmation. After sample confirmation of core sequence and appearance, bulk supply can proceed; discounts and payment methods are executed according to the contract.

Related categories and similar materials: Shuntai Wire and Ribbon Cable Classification; Shuntai Wire Agency Column; Shuntai UL4330 Multi-core Silicone Sheathed Wire; Shuntai Gray Ribbon Cable.

Get a Quote Back to List